About Us
The department of Mechanical Engineering at
Madanapalle Institute of Technology & Science started along
with the institution in the year 1998. The department is
currently offering one UG program (B.Tech in Mechanical
Engineering) with an intake of 240 and one PG program
(M.Tech with Advanced Manufacturing Systems), with an intake
of 24. In addition, the department is also a Recognized
Research Centre (RRC) under JNTUA, Anantapuramu, which
enables scholars to pursue full time PhD in Mechanical
Engineering, in the department. The B.Tech. programme under
department has been continuously accredited and
re-accredited by the National Board of Accreditation (NBA)
since 2013. The most recent NBA accreditation, in 2019, was
under TIER I with a score of 715 out of 1000. The College
Academic Council and the Department Board of Studies strive
hard to provide quality education and most advanced
curriculum and syllabus to make the students industry ready
and excel in today’s technologically intensive careers. The
alumni of the department have been successful in building
remarkable careers in Mechanical engineering and allied
disciplines.
The department has a thriving research program with
externally funded projects worth a total of more than Rs.
One Crore. Faculty are also engaged in providing engineering
consultancy for industrial entities. The research output
from the department, in terms of quality journal
publications and patents, has been steadily increasing in
recent years. The students of the Department benefit from
this thriving R&D culture in the department which provides
them with an exposure to the state of the art research
facilities and cutting-edge technologies.
The department is endowed with highly qualified and
experienced faculty most of whom have obtained their
Doctoral degrees from eminent institution in India like
IISc, IITs, Central Universities, NITs and Foreign
Universities. The department is also well equipped with
modern laboratories. In addition, there are several industry
supported labs in the department, which are established with
help and support from core engineering companies like
Siemens and Dassault Systemes. The industry related labs
strive to improve the employability of the students in core
companies.
Since its inception, the department has been striving
to take forward the vision and mission of the institution by
making specific contributions in promoting education and
research in the broad field of Mechanical Engineering. The
vision and mission of the Department are as follows:
Vision
“To be a Centre of Excellence in the field of Mechanical Engineering to generate quality human resource in mechanical engineering who can contribute constructively to the technological and socio-economic development of the Nation.”
Mission
M1:To provide Globally competent Mechanical
Engineers through Experienced and Committed Faculty.
M2:To nurture graduates with Scientific temperament,
Rational thinking and Humanistic approach for Excelling in
their Career.
M3:To promote Excellence in teaching and research
through collaborative activities.
Goals
- To maintain a high standard of mechanical engineering education through outstanding teaching innovative curriculum and research training that reflect the changing needs of society.
- To attract highly motivated students with enthusiasm, attitude and interest in Mechanical Engineering.
- To pursue excellence in research and technology transfer.
- To increase the public awareness of departmental activities and the Mechanical Engineering profession.
Head of the Department
Profile of Dean
Dr. T. N. Sreenivasa B.E., (Mechanical), M.E., Ph.D., FIE, C Eng.
- 30 years of Teaching, Administration and Research Experience.
- National Executive Member of ISTE, New Delhi.
- 10 Years as Principal of AMC Engineering College, Bangalore.
- 1.5 Years as CEO of AMC Educational Institutions, Bangalore.
- 09 Years Lecturer, Asst. Prof in BMS College of Engg. and BMSIT, Bangalore.
- 11 Years Asst.Prof in Dayananda Sagar College of Engg.
- Supervising 04 Candidates for their Ph. D. Program under VTU and 02 Candidates awarded PhD from VTU.
- Guided 50 Projects for UG, PG and M.Tech students published / presented 47 Technical Papers in peer reviewed refereed National and International Journals.
- Visited several foreign universities in Singapore, Malaysia, Thailand, and Bangladesh as a part of International Exposure.
- Worked as an external assessor for Caledonian College of Engineering, Muscat- appointed by Glasgow Caledonian University, UK during 2014-17.
Board of Studies
Department’s Board of Studies (BoS) is a statutory body which is primarily responsible for compiling the curricula for all the courses offered by the Department and for regularly revising the syllabi for keeping it up to date with the changing trends. In addition, BoS also reviews the progress of the Department in terms of academics and research and suggests strategies for continuous improvement. The BoS comprises of senior faculty of the Department and experts from Industry and Peer Institutions. The external members in the current Bo of the Department are:
S.No | Name of the Member | Designation |
---|---|---|
1 | Dr. M. Lakshmana Rao (BoS - Chairman) |
Professor & Head of the Department, ME |
2 | Dr. B. Durga Prasad (JNTUA University Nominee) |
Professor, Mechanical Department, JNTUA CEA, Ananthapuramu. |
3 | Dr. E. Anil Kumar (Subject Expert) |
Professor, Mechanical Engineering, IIT, Tirupati. |
4 | Dr. B. Venkatesham (Subject Expert) |
Professor, Mechanical and Aerospace Engineering, IIT, Hyderabad. |
5 | Mr. Kashinath M Patnasetty (Industry Expert) |
Head, VAS Application Support Ace Designers Limited, Bangalore. |
6 | Mr. Anand Swaroop Donepudi (Alumni) |
Product and Application Engineer CBRE South Asia Pvt. Ltd., |
Program Assessment Committee
Industry Alumni Advisory Board
The Department constituted an advisory board with experts from the Industry and department alumni to seek guidance on strategic planning and functioning of the Department especially with regards to academic aspects like curriculum development and teaching and learning processes. The current external members of the IAAB are:
S.No | Name of the Member | Designation |
---|---|---|
1 | Mr. M. Hari Prasad (Industry Expert) |
Former Scientist, Aeronautical Development Establishment (ADE), Bangalore |
2 | Dr. R. Thundil Karuppa Raj (Academic Expert) |
Professor, Automotive Engineering, VIT, Vellore |
3 | Mr. M. Venkata Satyanarayana | MITS Alumni, Principal Engineer – R&D, Sahajanand Medical Technologies, Surat |
4 | Mr. Anand Swaroop Donepudi | MITS Alumni |
Advanced Manufacturing Systems
First YEAR I SEMESTER
S.No | Name of the Subject | Credits |
---|---|---|
1 | Advanced Machining Processes | 3 |
2 | Automation in Manufacturing | 3 |
3 | Discipline Electives-I
A. Advanced Materials Characterization B. Advanced Tool Engineering Design C. Micro and Nano Manufacturing Technology D. Advanced Casting and Welding Technology |
3 |
4 | Discipline Electives-II
A. Theory of Metal Forming B. Industrial Surface Engineering C. Quality and Reliability Engineering D. Supply Chain Management |
3 |
5 | Research Methodology and IPR | 2 |
6 | Advanced Machining Laboratory | 2 |
7 | Modelling and Simulation Laboratory | 2 |
8 | Audit Course I
A. Disaster Management B. Sanskrit for Technical Knowledge C. Constitution of India D. Pedagogy Studies |
2 |
First YEAR II SEMESTER
S.No | Name of the Subject | Credits |
---|---|---|
1 | Robotics in Manufacturing | 3 |
2 | Advanced Production and Operations Management | 3 |
3 | Discipline Electives-II
A. Advanced Materials Processing B. Advanced Operations Research C. Rapid Prototyping and Tooling D. Design and Analysis of Experiments |
3 |
4 | Discipline Electives-III
A. FEA in Manufacturing B. Design and Manufacturing of MEMS and MICRO Systems C. Flexible Manufacturing Systems D. Precision Engineering |
3 |
5 | Computer Aided Engineering Laboratory | 2 |
6 | Production Tooling Laboratory | 2 |
7 | Mini Project | 2 |
8 | Audit Course II
A. English for Research Paper Writing B. Value Education C. Stress Management by Yoga D. Personality Development through Life Enlightenment Skills |
2 |
Second YEAR I SEMESTER
S.No | Name of the Subject | Credits |
---|---|---|
1 | Discipline Electives-IV
A. Additive Manufacturing Technology B. Manufacturing Informatics C. Artificial Intelligence in Manufacturing D. Product Design and Development |
3 |
2 | Open Elective - III
A. Sensors for Intelligent Manufacturing and Condition Monitoring B. Total Quality Management C. Industrial Safety and Maintenance Engineering D. Machine Learning |
4 |
3 | Dissertation Phase I | 2 |
Second Year II Semester
S.No | Course Code | Course Title | Credits |
---|---|---|---|
1 | 20AMSP703 | Dissertation Phase I | 16 |
Time Tables
The page will be updated soon.

About the Programme
Bachelor of Technology (B. Tech.) in
Mechanical Engineering is the flagship program of the
Department which was started in the year 1998. This program
is designed to lay a strong foundation for students to build
a successful career or pursue higher education in the
Mechanical Engineering and allied fields. The program is
administered strictly according to the tenets of Outcome
Based Education (OBE) and it has been continuously
accredited by NBA since the year 2013. The program
curriculum is regularly updated and evolved considering of
the guidelines given by All India Council for Technical
Education (AICTE) and American Society for Mechanical
Engineers (ASME), and the syllabi is also designed in
accordance with the syllabi of competitive examinations for
Mechanical Engineering like GATE and IES .
The salient features of the programme are:
- Industry related labs, established in the Department with help from Siemens and Dassault Systemes, add immense value to the UG programme by aiding targeted employability training for the students.
- Students benefit from the experience and expertise of the highly qualified faculty who are all engaged in research and development.
- Scholarship programme titled SHARP incentivizes the student participation in faculty research thus their enrichment with valuable work experience while still on campus.
- Unique aspects of the programme include emphasis on MOOCS, self-learning, and internships which are all incorporated into the curriculum.
- Ample support is provided to the students to ensure their timely academic progress and to facilitate the realization of their potential.
- Initiatives like make up classes and remedial classes are in place to assist the students falling behind in their academic performance.
- Co-curricular and extra-curricular activities are conducted to galvanize the performing students towards higher achievement.
The co-curricular and extra-curricular activities organized by the Department, over and above the trainings and cultural/sports events conducted at college level, for the benefit of the students include:
- Employability training in Siemens Lab and Dassault Systemes Lab
- Training for competitive exams and core placements
- Industry visits
- Guest lectures
- Seminars
- Workshops
- Symposium with project expos
- Conferences

Outcome Based Education
As per the philosophy of OBE, expected
outcomes from the students at different stages during their
time in the program are articulated ahead of time and all
the academic activities are planned and implemented such
that they all contribute to the attainment of these
outcomes. The curriculum of the program, teaching and
learning processes, infrastructural facilities and the
co-curricular and extra-curricular activities are all
planned and organized with the overall objectives in mind.
Given below are the Programme Educational Objectives (PEOs),
Programme Specific Outcomes (POs) and Programme Outcomes
(POs) of the B. Tech. Mechanical Engineering Programme
offered by the Department:
The PEOs of our B.Tech in Mechanical Engineering
programme are:
The graduates, within 4-5 years of completing the
course, will
- PEO1. Build a thriving career in mechanical engineering and allied disciplines.
- PEO2. Design and produce products by the optimum methods for the benefit of the society while working in a team with ethical values.
- PEO3. Engage in continuous learning to adapt to the socio-economic-technological developments and pursue higher studies.
The specific outcomes that the graduates of the program shall achieve at the time of graduation are that they will be able to:
- PSO1. Apply concepts and principles from Applied Mechanics to design, develop and evaluate mechanical systems for a specified purpose.
- PSO2. Employ governing laws of thermodynamics, fluid flow and heat transfer for design and analysis of thermo-fluid systems.
- PSO3. Utilize the knowledge and learning of materials and manufacturing sciences to design, plan and monitor production operations in an Industry.
The POs, which are prescribed by NBA, to be attained at the time of graduation are as follows:
- PO1.Engineering Knowledge: Apply the knowledge of mathematics, science, engineering fundamentals and an engineering specialization to the solution of complex engineering problems.
- PO2.Problem Analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and Engineering sciences.
- PO3.Design/Development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
- PO4.Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
- PO5.Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations.
- PO6.The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
- PO7.Environment and sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
- PO8.Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
- PO9.Individual and team work: Function effectively as an individual and as a member or leader in diverse teams, and in multidisciplinary settings.
- PO10.Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
- PO11. Project management and finance: Demonstrate knowledge and understanding of the engineering management principles and apply these to one's own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
- PO12. Life-long learning: Recognize the need for and have the preparation and ability to engage in independent and lifelong learning in the broadest context of technological change.
Provided below is the final attainment of the aforementioned outcomes in the graduating batch of UG students of the Department, assessed using an elaborate method which involved data collection, compilation and analysis from various examinations given by students and surveys collected from them at different stages during their time in the Department.
Attainment of POs/PSOs in Recent Academic Years
Mentoring Program
True to the philosophy of Outcome Based
Education (OBE), ample support system is provided to the
students to ensure their timely academic progress and to
facilitate the realization of their true potential. The
holistic progress of the students, as they evolve from
out-of-school teenagers to industry-ready professionals, is
monitored by the mentors appointed by the department; one
per every 20 students.
Mentors meet with their mentees as per a fixed schedule
and they are charged with the responsibility of:
- Identifying any specific needs or issues of each student
- Addressing the identified need appropriately
- Encouraging the students to devise and follow an action plan for achieving their specific goals
- Montoring the progress of the students and helping them along the way
The mentoring program is adminstered using an integrated ERP software called Institution Management System (IMS) through which the mentors have access to all essential data, like attendance, academic transcripts etc., of their respective mentees. This enables the mentors to closely monitor the progress of their mentees and advise them accordingly. The mentors also record each individual meeting with a mentee in his/her portfolio on IMS so that appropriate follow up action can be taken in subsequent meetings. In addition to academic performance and attendance, mentors focus on the overall learning of the mentees like personality development, employability training and career planning. Mentors also stay in touch with the parents to keep them updated about the progress of the students and to leverage their support in better helping the mentees, when needed. Given below is a table depicting different aspects focused on by mentors and metrics used to assess progress; followed by a document showing the allotment of mentees to faculty mentors.
Mentoring: Aspects and Metrics
S.No | Type of Mentoring | Monitoring Measures |
---|---|---|
1 | Attendance | Monthly attendance percentage, Regularity to classes to improve academic performance |
2 | Academic Performance | Mid-term and Semester-end marks, Completion of MOOCs Assignments |
3 | Practical Skills – Laboratory Work | Periodic progress of the laboratory work, submission of observations/records, project completion status, participation in technical events like hackathon, intra and inter college symposiums |
4 | Soft Skills | Ability to communicate, improvement in English speaking, Participation in Extra-curricular Activities, Interpersonal & group discussion skills |
5 | Career Guidance | Employability Training, Internship opportunities availed, Higher Education Planning, Competetive Exams Preperation, Placement status, Entrepreneurship development, Self-employment opportunities, etc. |
Mentor Allocation for Department Students
Remedial Classes
Department provides ample support to the
students falling behind in the academics by conducting
remedial classes. It is mandatory for the students scoring
less than 50% of marks in a course during the sessional
exams to attend these remedial classes for that course which
are scheduled after the regular hours. In these remedial
classes, Teachers revise the topics coevered in the class
and in analytical subjects, teachers solve number of
problems to improve the comprehsion of the students.
Given below is the schedule of remedial classes
Schedule of Remedial Classes
Remedial Classes 2021-22
Remedial Classes 2020-21

Feedback Surveys
Department continuously collects feedback from all its stakeholders by way of periodic surveys. Prominent among these surveys are:
- Graduate Exit Survey
- Student Survey
- Faculty Survey
- Alumni Survey
- Employer Survey
- Parents Survey
The responses received from these surveys are duly compiled and analysed to assess the level to which the Department was able to meet the expectations of its stakeholders and to identify the areas in which improvements are called for by them.
Given below is a compilation of analysis reports from Graduate Exit Surveys, followed by the same of surveys conducted for other stakeholders
Report on Analysis of Feedback Survey
Report on Analysis of Graduate Exit Survey
Report on Analysis of Surveys collected from Stakeholders
Minor Degree programs of Mechanical Engineering
Electric Vehicles
Electric VehiclesNano Technology
Nano TechnologyDigital Manufacturing
Digital ManufacturingMechatronics
MechatronicsEnergy Engineering Stream
Energy Engineering StreamAcademic Calendar for AY 2019-20: Second Semester

Academic Calendar for AY 2018-19: First Semester

First Year I Semester - R20
S.No | Name of the Subject | Theory/Lab | Credits |
---|---|---|---|
1 | Professional English | Theory | 3 |
2 | Engineering Calculus | Theory | 4 |
3 | Engineering Chemistry | Theory | 3 |
4 | Engineering Graphics | Theory | 3 |
5 | Programming for Problem Solving (Python) | Lab | 3.5 |
6 | Chemistry Laboratory | Lab | 1.5 |
7 | Workshop Practice | Lab | 1.5 |
First Year II Semester - R20
S.No | Name of the Subject | Theory/lab | Credits |
---|---|---|---|
1 | Linear Algebra and Differential Equations | Theory | 3 |
2 | Engineering Physics | Theory | 4 |
3 | Basic Electrical Engineering | Theory | 4 |
4 | C Programming and Data Structures | Theory | 3 |
5 | English for Professional Purposes Laboratory | Lab | 1 |
6 | Physics Laboratory | Lab | 1.5 |
7 | Electrical Engineering Laboratory | Lab | 1.5 |
8 | C Programming and Data Structures Laboratory | Lab | 1.5 |
Second Year I Semester - R20
S.No | Name of the Subject | Theory/lab | Credits |
---|---|---|---|
1 | Numerical Methods | Theory | 3 |
2 | Engineering Mechanics | Theory | 3 |
3 | Basic Thermodynamics | Theory | 3 |
4 | Materials Science and Engineering | Theory | 3 |
5 | Fluid Mechanics and Hydraulic Machinery | Theory | 3 |
6 | Materials Science and Engineering Laboratory | Lab | 1.5 |
7 | Fluid Mechanics and Hydraulic Machinery Laboratory | Lab | 1.5 |
8 | 3-D Modelling Laboratory | Lab | 1.5 |
9 | Skill Oriented Course-I | Theory | 2 |
10 | Environmental Science | Theory | 0 |
Second Year II Semester - R20
S.No | Name of the Subject | Theory/Lab | Credits |
---|---|---|---|
1 | Economics and Financial Accounting for Engineers | Theory | 3 |
2 | Probability and Statistics | Theory | 3 |
3 | Mechanics of Solids | Theory | 3 |
4 | Theory of Machines | Theory | 3 |
5 | Manufacturing Technology-I | Theory | 3 |
6 | Manufacturing Technology-I Laboratory | Theory | 1.5 |
7 | Mechanics of Solids Laboratory | Lab | 1.5 |
8 | Dynamics & Electrical Machines Laboratory | Lab | 1.5 |
9 | Skill Oriented Course – II | Lab | 2 |
10 | Indian Constitution | Theory | 0 |
Third Year I Semester - R18
S.No | Name of the Subject | Theory/Lab | Credits |
---|---|---|---|
1 | Engineering Analysis | Theory & Lab | 3 |
2 | Design of Machine Elements | Theory | 3 |
3 | Manufacturing Technology | Theory | 3 |
4 | Heat Transfer | Theory | 3 |
5 | Discipline Elective – I | Theory | 3 |
6 | Open Elective – I | Theory | 3 |
7 | Corporate Communication Laboratory | Lab | 1 |
8 | Fluid Mechanics and Hydraulic Machines Laboratory | Lab | 1.5 |
9 | Manufacturing Technology Laboratory | Lab | 1.5 |
10 | Mandatory Course – III | Theory | 0 |
Third Year II Semester - R18
S.No | Name of the Subject | Theory/Lab | Credits |
---|---|---|---|
1 | English Communication - Reading and Writing | Theory | 2 |
2 | CAD/ CAM | Theory | 3 |
3 | Thermal Engineering | Theory | 3 |
4 | Discipline Elective-II
(Refer Annexure –III) |
Theory | 3 |
5 | Discipline Elective-III | Theory | 3 |
6 | Open Elective – II | Theory | 3 |
7 | Advanced Manufacturing Laboratory | Lab | 1.5 |
8 | Robotics Laboratory | Lab | 1.5 |
9 | Virtual Laboratory | Lab | 1.5 |
10 | Mandatory Course - IV | Theory | 0 |
Fourth Year I Semester - R18
S.No | Name of the Subject | Theory/Lab | Credits |
---|---|---|---|
1 | Engineering Metrology and Measurements | Theory | 3 |
2 | Machine Learning for Mechanical Engineering | Theory | 3 |
3 | Discipline Elective-IV | Theory | 3 |
4 | Discipline Elective - V | Theory | 3 |
5 | Open Elective - III | Theory | 3 |
6 | Thermal Engineering Laboratory | Lab | 1 |
7 | CAE Laboratory | Lab | 1 |
8 | Project Work – I | - | 2 |
Fourth Year II Semester - R18
S.No | Name of the Subject | Theory/Lab | Credits |
---|---|---|---|
1 | Discipline Elective-IV | Theory | 3 |
2 | Open Elective-IV | Theory | 3 |
3 | Project Work II | - | 12 |
Doctoral
There is provision for research scholars pursuing PhD in Mechanical Engineering to conduct their doctoral research at the Department of Mechanical Engineering at MITS through its Recognized Research Centre under JNTUA, Anantapuramu. The scholars benefit from the intellectual wealth of highly qualified and experienced faculty of the Department as well as the advanced facilities available for research. Given below is a list of scholars who are currently working under the guidance of the Department faculty towards PhD degree from JNTUA.
Full-Time Research Scholars Details 2014-2015 Batch
S.No | Scholar Name | Guide Name | Co-Guide from JNTUA
College of
Engineering, Anantapur |
Date of Admission | Area of Research |
---|---|---|---|---|---|
1 | V. Chengal Reddy | Dr. G. Harinath Gowd | Prof. MLS. Deva Kumar
Professor,Dept. of ME JNTUA College of Engineering, Anantapuramu |
21-04-2015 | Laser Beam Machining |
Full-Time Research Scholars Details 2015-2016 Batch
S.No | Scholar Name | Guide Name | Co-Guide from JNTUA College of Engineering, Anantapur | Date of Admission | Area of Research |
---|---|---|---|---|---|
1 | T. Siva Prasad | Dr. C. Yuvaraj | Dr. K. Prahlada Rao
Principal, JNTUA College of Engineering, Ananthapuramu |
2015-16 | Composite Materials |
2 | H. Raghavendra | Dr. P. Suryanarayana Raju | Dr. K. Hemachandra Reddy
Professor, Dept. of ME, JNTUA College of Engineering, Ananthapuramu |
2015-16 | Renewable Energy |
3 | Bazani Shaik | Dr. G. Harinath Gowd | Prof. B. Durga Prasad
Professor, Dept. of ME, JNTUA College of Engineering, Ananthapuramu |
2015-16 | Friction Stir process |

Research in the Department
Research plays a significant role in the
success of any academic institution. Sustained research in
academia is imperative not only for continuous learning and
development of the faculty, in tune with the evolving
technology, but also for producing quality graduates who
benefit from the culture of exploration and innovation in a
research intensive institution. Further, research and
innovation are essential corner stones for upliftment of a
nation and all institutions of higher education should play
an instrumental role in promoting research on their campus,
both among faculty and students.
The vision and mission statements of Department of the
Department of Mechanical Engineering, as well as those of
the institution, give much emphasis research promotion and
accordingly the department, over the last decade, has
strived to build a brand for its research. Through these
efforts, the Department was able to rapidly enhance its
research output in terms of metrics like funded research,
consultancy, publications, and patents.
Faculty publications
Department faculty are actively publishing their research findings in peer reviewed and widely indexed journals as well as conference proceedings. The original findings published by the Department faculty have been receiving extensive citations from other researchers across the world. Given below is a list of recent publications by the department faculty.
Title of paper | Name of the author/s | Name of journal | Year of publication | DOI |
---|---|---|---|---|
Biofuel production from novel Prunus domestica kernel oil: process optimization technique | P Babu Aurtherson, Bhanu Teja Nalla, Karthikeyan Srinivasan, Kulmani Mehar & Yuvarajan Devarajan | Biomass Conversion and Biorefinery | 2021-2022 | DOI:10.1007/s13399-021-01551-5 |
Renewable Pathway and Twin Fueling Approach on Ignition Analysis of a Dual-Fuelled Compression Ignition Engine • | Yuvarajan Devarajan, Beemkumar Nagappan, Gautam Choubey, Suresh Vellaiyan and Kulmani Mehar | Energy & Fuels | 2021-2022 | DOI:10.1021/acs.energyfuels.0c04237 |
Tribological performance of low viscosity halogen-free ammonium based protic ionic liquids with carboxylate anions as neat lubricants | Ghassan M.J.Al KaisyaM. Ibrahim A.MutalibaT V V L N Rao bAdolfoSenatorec | Tribology International | 2021-2022 | DOI; 10.1016/j.triboint.2021.107058 |
Investigations on effectiveness of transfer layer on specific wear rate and coefficient of friction during dry sliding of hybrid polymer matrix composites | Kalaiselvan Subramanian, Sarala Ramasubramanian, Baskaran Selvam, Prithivirajan Rajaram. | Polymer Composites | 2021-2022 | https://doi.org/10.1002/pc.26371 |
Characterisation of aluminium and alumina thin films coatings using different deposition methods for enhancement of optical properties | Harinandan Kumar, M. Muralidhar Singh, P. Sivaiah | International Journal of Materials Engineering Innovation | 2021-2022 | https://www.inderscienceonline.com/doi/pdf/10.1504/IJMATEI.2021.116943 |
A review on TIG welding technology variants and its effect on weld geometry | Kamlesh Kumar, Ch. Sateesh Kumar, Manoj Masanta, Swastik Pradhan | MaterialsToday: Proceedings | 2021-2022 | https://doi.org/10.1016/j.matpr.2021.07.308 |
Performance improvement of turning operation during processing of AISI 304 with novel textured tools under minimum quantity lubrication using hybrid optimization | Sivaiah, P., Ajay kumar G, V., Lakshmi Narasimhamu, K. and Siva Balaji, N | Materials and Manufacturing Processes | 2021-2022 | https://doi.org/10.1080/10426914.2021.1967977 |
Investigation on the Stress Distribution During Hard Turning of AISI 52100 Steel Using Al2O3/TiCN Cutting Tool Coated with Mono-layered AlCrN and Multi-layered AlTiN/TiN Coating | Ch Sateesh Kumar, Pawan Kumar, Kamlesh Kumar, Filipe Fernandes, Himadri Majumder, Akhtar Khan, and Saroj Kumar Patel | Processing and Characterization of Materials, Springer Proceedings in Materials | 2021-2022 | https://doi.org/10.1007/978-981-16-3937-1_27 |
Processing of 17-4 PH steel in turning operation with hybrid textured tools | P. Sivaiah, Muralidhar Singh M, V. Chengal Reddy, P. Meghashyam | Materials and Manufacturing Processes | 2021-2022 | DOI: 10.1080/10426914.2021.2001503 |
Effect of single and hybrid pattern textured tools on turning process performance | P. Sivaiah, Muralidhar Singh M, and V. Chengal Reddy., | Materials and Manufacturing Processes | 2021-2022 | doi.org/10.1080/10426914.2021.2001511 |
Nonlinear dynamics and chaos of a multi-disk rotating shaft undergoing large deflection mounted on a moving support | HanmantP.Phadatare BarunPratiher | International Journal of Non-Linear Mechanics | 2021-2022 | https://doi.org/10.1016/j.ijnonlinmec.2021.103819 |
Micro-structure and self-lubricant properties of powder mixed electrical discharge metal matrix composite coating | Ilangovan Arun , C Yuvaraj,Sivakumar and S Thamizhmanii Proc IMechE Part E: | J Process Mechanical Engineering | 2021-2022 | DOI: 10.1177/09544089211062665 journals.sagepub.com/home/pie |
Electric discharge coating process variation and its wear properties | Ilangovan Arun, C. Yuvaraj, G. Chandra Sekhar Reddy and Nara Siva Balaji | Int. J. Surface Science and Engineering | 2021-2022 | https://doi.org/10.1504/IJSURFSE.2021.116329 |
Optimizing pyrolysis process parameters of plastic grocery bag, with mass–energy assessment and characterization of oil at optimal condition | Dipankar Saha, Jackson Gurung, Bidesh Roy, Ajmal Koya Pulikkal, Abhijit Bhowmik & Satyajit Pattanayak | Clean Technologies and Environmental Policy | 2021-2022 | https://doi.org/10.1007/s10098-022-02298-x |
Processing of hardened steel by MQL technique using nano cutting fluids | Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, and Bibhuti Bhushan Biswal | Materials and Manufacturing Processes | 2020-2021 | https://doi.org/10.1080/10426914.2020.1832688 |
Multiscale finite element prediction of thermomechanical flexural strength of nanotube-reinforced hybrid smart composite panel bonded with SMA fibre, | Mehar K, Panda S K and, Dewangan H C | Structures | 2020-2021 | https://doi.org/10.1016/j.istruc.2020.10.049 28, 2300-2310 |
Machinability evaluation during machining of AISI 52100 steel with textured tools under Minimum Quantity Lubrication – A comparative study | P. Sivaiah, M. Guru Prasad , Muralidhar Singh M& B. Uma | Materials and Manufacturing Processes | 2020-2021 | https://doi.org/10.1080/10426914.2020.1802034 |
Investigation on turning process performance using hybrid-textured tools under dry and conventional cooling environment | P Sivaiah, Muralidhar Singh M, SaduVenkatesu, G Yoganjaneyulu | Materials and Manufacturing Processes | 2020-2021 | https://doi.org/10.1080/10426914.2020.1813893 35(16), 1852-1859 |
Study on the effect on combining long-chain additive with neat bio-dieselfueled engine to examine its ignition characteristics | Yuvarajan Devarajan, Dinesh Babu Munuswamy, Beemkumar Nagappan,Gautam Choubey | Fuel | 2020-2021 | https://doi.org/10.1016/j.fuel.2020.118400 |
A comparison on microstructure and mechanical properties of electric discharge metal matrix nickel and silica composite coating on duplex stainless steel | Ilangovan Arun, C Yuvaraj, A Madhu, T Ramesh | Journal of Composite Materials | 2020-2021 | https://doi.org/10.1177/0021998320953882 |
Corrosion behaviour of detonation gun sprayed cermet coatings on AA5083 T. Arunnellaiappan , | S. Baskaran , S. Arun & R. Prithivirajan | Surface Engineering | 2020-2021 | https://doi.org/10.1080/02670844.2020.1807096 |
Degradation of distillery effluent by twisted-type Iron electrodes: experimental with ANN approach Charles David, | Karpagaraj A T. ArunNellaiappan | International Journal of Environmental Analytical Chemistry | 2020-2021 | https://doi.org/10.1080/03067319.2020.1807532 |
Analytical analysis of combined effect of interior guide tube and draft tube on cross flow turbine performance | Abbas, A., Alam, M. and Kumar, R | Materials Today: Proceedings | 2020-2021 | https://doi.org/10.1016/j.matpr.2020.08.796 |
Design and cost analysis of fish friendly kaplan tubine: A case study | Kumar, R., Abbas, A., Dwevedi, G. and singal, S.K | Materials Today: Proceedings | 2020-2021 | https://doi.org/10.1016/j.matpr.2020.08.805 |
Micromechanical Modeling of Ferrite–Austenite Interphase of 23Cr-6Ni-3Mo Duplex Stainless Steel with an Initial Equiaxed Austenite Morphology Using Finite Element Methods | Kumar P., Choudhury A.R., Basantia S., Dutt A | Advances in Industrial Automation and Smart Manufacturing. Lecture Notes in Mechanical Engineering | 2020-2021 | https://doi.org/10.1007/978-981-15-4739-3_46 |
Application of Artificial Neural Network to Friction Stir Welding Process of AA7050 Aluminum Alloy. | Dutt A.K., Sindhuja K., Reddy S.V.N., Kumar P. | Advances in Industrial Automation and Smart Manufacturing. Lecture Notes in Mechanical Engineering | 2020-2021 | https://doi.org/10.1007/978-981-15-4739-3_34 |
Characterization of spheroidized alumina powders for ceramic 3D printing application | Ram Krishna, Sreenivasan M, Lyutyk M, Barosh M | Lecture Notes in Mechanical Engineering with title: Advances in Manufacturing Engineering and Materials II | 2020-2021 | https://doi.org/10.1007/978-3-030-71956-2_20 1(1), 249-257 |
A comparative simulation analysis of conventional and composite leaf spring | Kumar MD, Mohanraj T, Suresh G, Ram Krishna, Sreenivasan M, Arunkumar J, Yogesh C, Nayab Hussain ST | Lecture Notes in Mechanical Engineering with title: Advances in Manufacturing Engineering and Materials II | 2020-2021 | https://doi.org/10.1007/978-3-030-71956-2_22 1, 270-281 |
Parametric Investigation of Beta Type Stirling Engine | H. Raghavendra,P. Suryanarayana Raju, and K. Hema Chandra Reddy | Advances in Fluid Dynamics, Lecture Notes in Mechanical Engineering | 2020-2021 | https://doi.org/10.1007/978-981-15-4308-1_32 |
Effect of Geometric and Operational Parameters on the Performance of a Beta Type Stirling Engine: A Numerical Study | H. Raghavendra, P. Suryanarayana Raju, and K. Hema Chandra Reddy | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | 2020-2021 | https://doi.org/10.1007/s40997-020-00406-0 |
Heat transfer enhancement through porous fins: A comprehensive review of recent developments and innovations | Tuhin Deshamukhya, Dipankar Bhanja , Sujit Nath. | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. July 2020. | 2020-2021 | doi:10.1177/0954406220939600 |
Implementation of Blockchain-Based Security and Privacy in Energy Management | AD Dhass, SR Anand, Ram Krishna | Advanced Technologies for Solar Photovoltaics Energy Systems | 2020-2021 | https://doi.org/10.1007/978-3-030-64565-6_18 1, 515-527 |
Experimental investigation on solar-powered ejector refrigeration system integrated with different concentrators | Devarajan, Y., Nagappan, B., Subbiah, | Environ Sci Pollut Res Int | 2020-2021 | doi: 10.1007/s11356-020-12248-z |
Experimental investigation on slaughter, fish waste and poultry excrete oil as fuel blends in diesel engine | J.Hemanandh, Yuvarajan Devarajan, Ruby Mishra & Nagaraj Meenakshisundaram | Biomass Conversion and Biorefinery | 2020-2021 | https://doi.org/10.1007/s13399-021-01293-4 |
Thermal frequency analysis of FG sandwich structure under variable temperature loading, | Sahoo B, Mehar K, Sahoo K, Sharma N and Panda S | Structural Engineering and Mechanics | 2020-2021 | doi.org/10.12989/sem.2021.77.1.001 |
Theoretical modelling and experimental verification of modal responses of skewed laminated sandwich structure with epoxy-filled softcore | Katariya P V, Panda S K, Mehar K | Engineering Structures | 2020-2021 | doi.org/10.1016/j.engstruct.2020.111509 |
Thermal buckling strength of smart nanotube-reinforced doubly curved hybrid composite panels | Mehar K, Mishra P K, Panda, S K, | Computers and Mathematics with Applications | 2020-2021 | https://doi.org/10.1016/j.camwa.2021.03.010 |
Thermal post-buckling strength prediction and improvement of SMA bonded carbon nanotube-reinforced shallow shell panel: a nonlinear FE micromechanical approach | Mehar K, Mishra P K, Panda, S K, | Journal of Pressure Vessel Technology | 2020-2021 | Accepted Manuscript |
Multiple-objective optimization of hydroxyapatite- added EDM technique for processing of 316L-steel Md Al-Amin, | Ahmad-Majdi Abdul-Rani, Rasel Ahmed, T. V. V. L. N. Rao | Materials and Manufacturing Processes | 2020-2021 | https://doi.org/10.1080/10426914.2021.1885715 |
Dry Sliding Tribological Studies of ZA-27/Al2O3 Metal Matrix Nanocomposites by using Response Surface Methodology | Shivakumar N, Vasu Vand Narasaiah N | Journal of the Chinese Society of Mechanical Engineers | 2020-2021 | https://doi.org/10.29979/JCSME, 41(6), P827-836 |
A review on the suitability of wire arc additive manufacturing (WAAM) for stainless steel 316 | Karpagaraj. A, Baskaran. S, Arunnellaiappan. T, Kumar. N.R | AIP Conference Proceedings | 2020-2021 | https://aip.scitation.org/doi/pdf/10.1063/5.0004148 |
Influence of Optimization Techniques on Wire Electrical Discharge Machining of Ti–6Al–2Sn–4Zr–2Mo Alloy using Modeling Approach. | A. Perumal A, Azhagurajan S, Suresh Kumar, R. Prithivirajan, S. Baskaran, P. R. Rajkumar, C. Kailasanathan, G. Venkatesan | Journal of Inorganic and Organometallic Polymers and Materials | 2020-2021 | https://doi.org/10.1007/s10904-021-01953-y |
Development of multi functioning organic waste shredding machine for natural compost | E.Pavankumar, S. Baskaran*, R. Prithivirajan, S. Vinoth Kumar, A. Karpagaraj | Advances in Industrial Automation and Smart Manufacturing | 2020-2021 | https://doi.org/10.1007/978-981-15-4739-3_90 |
Investigation on slurry pot erosion wear behaviour of AA5083 aluminium alloy | K. Sasidhar Reddy, B. Sasi Prasad, E. Sai Kiran Gowd, A. Sekhar Babu, B. Santhosh Kumar, R. Manoj Kumar, S. Baskaran | Advances in Industrial Automation and Smart Manufacturing | 2020-2021 | https://doi.org/10.1007/978-981-15-4739-3_47 |
Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants | Vinoth kumar Sivalingam, Zhuoliang Zana, Jie Sun, Baskaran Selvam, Munish Kumar Gupta, Muhammad Jamil, Mozammel Mia . | Tribology International | 2020-2021 | https://doi.org/10.1016/j.triboint.2020.106235 |
A comparative study on different textured and untextured tools performance in turning process | P. Sivaiah , M. Revantha Kumar , S. Bala Subramanyam & K. L. V. Prasad | Materials and Manufacturing Processes | 2020-2021 | https://doi.org/10.1080/10426914.2020.1866201 |
Identifying the effectiveness of manner of cryogenic coolant supply in different cryogenic cooling techniques in turning process—a review | P. Sivaiah & D. Chakradhar | Machining Science and Technology | 2020-2021 | https://doi.org/10.1080/10910344.2020.1815039 |
Knowledge and Practice of Yoga in Adolescent Girls | V Shankernath, Srinivaas Ankamreddy & Santosh Kumar Mahapatra | International Journal of Yoga and Allied Sciences | 2020-2021 | -- |
Growth and Optical properties of silicon based nanocomposite thin films | K. Lakshun Naidu, M. A. Mohiddon, V. Shankernath, M. Ghanashyam Krishna | AIP Conference proceedings | 2020-2021 | https://doi.org/10.1063/5.0019789 |
Determination of methane sorption capacity using microstructural analysis in coal of Jharia Coalfield, India | Kumar, H., Mishra, M.K.,Susmita Mishra, M. Muralidhar Singh & Dilip Kumar Srivastava | Arabian Journal of Geosciences | 2020-2021 | https://doi.org/10.1007/s12517-021-07051-0 |
Evaluation of Mechanical Properties of Glass Fiber-BMPM/DABA-PMC Composite. | M. Muralidhar Singh.M., Kumar, H. & Sivaiah, P | Trans Indian Inst Met | 2020-2021 | https://doi.org/10.1007/s12666-021-02314-6 |
Influence of rock properties on emission rate of Particulates Matter (Pm) during drilling operation in surface mines | Koneti Venkataravanappa Nagesha, Harinandan Kumar, Muralidhar Singh Munisingh | Iranian Journal of Earth Sciences | 2020-2021 | https://doi.org/10.30495/ijes.2021.677471 |
Alumina Thin film Coatings at Optimized Conditions using RF Magnetron Sputtering Process | Muralidhar Singh M , Harinandan Kumar , P. Sivaiah * | International Journal of Thin Films Science and Technology | 2020-2021 | http://dx.doi.org/10.18576/ijtfst/100103. |
Sustainability Assessment and Machinability Investigation of Austenitic Stainless Steel in Finish Turning with Advanced Ultra-Hard SiAlON Ceramic Tool under Different Cutting Environments | Smita Padhan & Anshuman Das & Aniket Santoshwar& Thakkar Raj Dharmendrabhai and Sudhansu Ranjan Das | Silicon | 2019-2020 | https://doi.org/10.1007/s12633-020-00409-1 12(2), 29 |
Nonlinear deformation and stress responses of a graded carbon nanotube sandwich plate structure under thermoelastic loading | Mehar K and Panda S K | Acta Mechanica | 2019-2020 | https://doi.org/10.1007/s00707-019-02579-5 231(3), 1105 - 1123 |
Numerical investigation of thermal frequency responses of graded hybrid smart nanocomposite (CNT-SMA-Epoxy) structure | Mehar K, Mishra P K and Panda S K | Mechanics of Advanced Materials and Structures | 2019-2020 | https://doi.org/10.1080/15376494.2020.1725193 |
Numerical investigation and experimental verification of thermal frequency of carbon nanotube- reinforced sandwich structure | Mehar K, Panda S K and Sharma N | Engineering Structures | 2019-2020 | https://doi.org/10.1016/j.engstruct.2020.110444 |
Multiscale modeling approach for thermal buckling analysis of nanocomposite curved structure | Mehar K and Panda S K | Advances in Nano Research | 2019-2020 | https://doi.org/10.12989/anr.2019.7.3.181 7(3), 179-188 |
Numerical buckling analysis of graded CNT-reinforced composite sandwich shell structure under thermal loading | Kulmani Mehar, Subrata Kumar Panda, Yuvarajan Devarajan, Gautam Choubey | Composite Structures | 2019-2020 | https://doi.org/10.1016/j.compstruct.2019.03.002 216, 406-414 |
Finite element solution of stress and flexural strength of functionally graded doubly curved sandwich shell panel | Dash S, Mehar K, Sharma N, Mahapatra T R and Panda S K, | Earthquakes and Structure | 2019-2020 | https://doi.org/10.12989/eas.2019.16.1.055 |
A novel optimum constructal fork-shaped fin array design for simultaneous heat and mass transfer application in a space-constrained situation | Saheera Azmi Hazarika, Tuhin Deshamukhya, DipankarBhanja, SujitNath | International Journal of Thermal Sciences | 2019-2020 | https://doi.org/10.1016/j.ijthermalsci.2019.106225 150, 106225 |
Recent advances in cavity-based scramjet engine- a brief review | Choubey G, Devaraja Y, Huang W, Mehar K, Tiwari M and Pandey K M | International Journal of Hydrogen Energy | 2019-2020 | https://doi.org/10.1016/j.ijhydene.2019.04.003 |
Nonlinear dynamic responses of layered skew sandwich composite structure and experimental validation | Katariya P V, Mehar K and Panda S K | International Journal of Non-Linear Mechanics | 2019-2020 | https://doi.org/10.1016/j.ijnonlinmec.2020.103527 |
Numerical Prediction of Deflection and Stress Responses of FGM Structure for Grading Patterns (Power-Law, Sigmoid and Exponential) and Variable Porosity (Even/Uneven) | Ramteke P M, Mehar K, Sharma N and Panda S K | Scientia Iranica | 2019-2020 | https://doi.org/10.24200/SCI.2020.55581.4290 |
Determination of Strength Parameters of Glass Fibers Reinforced Composites for Engineering Applications | M Muralidhar Singh, Harinandan Kumar, G Hemath Kumar, P Sivaiah, KV Nagesha, KM Ajay, G Vijaya | Silicon | 2019-2020 | https://doi.org/10.1007/s12633-019-0078-3 |
Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy | P Sivaiah, Venkata Ajay Kumar G, Muralidhar Singh M,Harinandan Kumar | Materials and Manufacturing Processes | 2019-2020 | https://doi.org/10.1080/10426914.2019.1697444 35(1), 61-71 |
Experimental assessment of performance and exhaust emission characteristics of a diesel engine fuelled with Punnai biodiesel/butanol fuel blends | Yuvarajan Devarajan · Dineshbabu Munuswamy · Beemkumar Nagappan· Ganesan Subbiah | Petroleum Science | 2019-2020 | https://doi.org/10.1007/s12182-019-00361-9 16, 1471-1478 |
An experimental study on the influence of an oxygenated additive in diesel engine fuelled with neat papaya seed biodiesel/diesel blends | Yuvarajan Devarajan, Nagappan Beemkumar, S. Ganesan, T. Arunkumar | Fuel | 2019-2020 | https://doi.org/10.1016/j.fuel.2020.117254 268, 117254 |
Detailed study on the effect of different ignition enhancers n the binary blends of diesel/biodiesel as a possible substitute for unaltered compression ignition engine | Yuvarajan Devarajan· DineshbabuMunuswamy · BeemkumarNagappan· Ganesan Subbiah | Petroleum Science | 2019-2020 | https://doi.org/10.1007/s12182-020-00463-9 17, 1151-1158 |
Feasibility study of employing diverse antioxidants as an additive inresearch diesel engine running with diesel-biodiesel blends | Yuvarajan Devarajan, BeemkumarNagappan, G. Mageshwaran, M. Sunil Kumar, R.B. Durairaj | Fuel | 2019-2020 | https://doi.org/10.1016/j.fuel.2020.118161 |
Study on the effect on combining long-chain additive with neat bio-dieselfueled engine to examine its ignition characteristics | Yuvarajan Devarajan, Dinesh Babu Munuswamy, Beemkumar Nagappan,Gautam Choubey | Fuel | 2019-2020 | https://doi.org/10.1016/j.fuel.2020.118400 |
Emission study on the effect of ignition improver in diesel fueled engine | Yuvarajan Devarajan, Gautam Choubey, Sivasaravanan Sellappan, Sunil Kumar Muniraj & Booma Devi Perumal Pillai | Petroleum Science and Technology | 2019-2020 | https://doi.org/10.1080/10916466.2020.1781169 38(12), 763-771 |
Synthesis of electrical discharge metal matrix composite coating through compacted semi-sintered electrode and its tribological studies | Ilangovan Arun, C.Yuvaraj, J.S. Senthilkumaar, S. Thamizhmanii | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2019-2020 | https://doi.org/10.1007/s40430-019-1718-7 41, 213 |
Electrical discharge metal matrix composite coating on duplex stainless steel and its wear behavior under different environmental conditions | Ilangovan Arun, B Gangadhar, C Yuvaraj and C Kousalya | Materials Research Express | 2019-2020 | https://doi.org/10.1088/2053-1591/ab33bf |
Influence of Silica on Microstructural Modification of Electrical Discharge Composite Coating and its Wear Performance | Arun, I., Yuvaraj, C., Jyothibabu P and G. Chandra Sekhar Reddy | Silicon | 2019-2020 | https://doi.org/10.1007/s12633-019-00333-z |
Parametric optimization of face turning parameters for surface roughness on EN 31 material using RSM and Taguchi method | Manu Ravuri, Y Santhosh Kumar Reddy, D Harsha Vardhan | Materials Today: Proceedings | 2019-2020 | https://doi.org/10.1016/j.matpr.2020.05.816 |
Fabrication of superhydrophobic coating on PEO treated zirconium samples and its corrosion resistance | T. Arun Nellaiappan | Materials Today: Proceedings | 2019-2020 | https://doi.org/10.1016/j.matpr.2019.09.058 27(3), 2056-2060 |
A review on the suitability of wire arc additive manufacturing (WAAM) for stainless steel 316 | T. Arun Nellaiappan | AIP Conference Proceedings | 2019-2020 | https://doi.org/10.1063/5.0004148 |
Development of statistical models to predict emission rate and concentration of particulate matters (PM) for drilling operation in opencast mines | K. V. Nagesha, Harinandan Kumar &M Muralidhar Singh | Air Quality, Atmosphere & Health | 2019-2020 | https://link.springer.com/article/10.1007/s11869-019-00723-7 12, 1073-1079 |
Ignition analysis on neat alcohols and biodiesel blends propelled | Yuvarajan Devarajan, Gautam Choubey & Kulmani Mehar | Energy Sources, Part A: Recovery, Utilization, And Environmental Effects | 2019-2020 | https://doi.org/10.1080/15567036.2019.1618998 |
Optical properties of magnetron sputtered nanocrystalline gold nitride thin films | Shankernath V, Lakshun Naidu K, Ghanashyam Krishna M, and Padmanabhan K A | Materials Research Express | 2019-2020 | https://doi.org/10.1088/2053-1591/ab2a55 |
Effect of feed rate on difficult to cut metals on Surface roughness and tool wear using Surface treated and untreated tools | Thamizhmanii S, Yuvaraj C, Sethilkumar JS, Arun I, | Sulaiman Procedia Manufacturing | 2019-2020 | https://doi.org/10.1016/j.promfg.2019.02.032 |
Estimation of Surface Roughness on Ti-6Al-4V in High Speed Micro End Milling by ANFIS Model. | Chakradhar Bandapalli, Bharatkumar Mohanbhai Sutaria and Dhananjay Vishnuprasad Bhatt | Indian Journal of Engineering and Materials Sciences | 2019-2020 | http://nopr.niscair.res.in/handle/123456789/53503 26 (5&6) 379-389 |
Multiobjective optimization of sustainable turning process using TOPSIS method | Sivaiah, P. and Uma, B. | Emerging Materials Research | 2019-2020 | https://doi.org/10.1680/jemmr.17.00029 |
Evaluation of hybrid textured tool performance under minimum quantity lubrication while turning of AISI 304 steel | Sivaiah, P. | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2019-2020 | https://doi.org/10.1007/s40430-019-2069-0 |
Investigation of cryogenically treated PVD TiAlN/NbN coated carbide inserts in end milling of hard Ti alloy | Vinothkumar Sivalingam, Jie Sun, Baskaran. S,Pengwei Zheng | Journal of Testing and Evaluation | 2019-2020 | https://www.astm.org/DIGITAL_LIBRARY/JOURNALS/TESTEVAL/PAGES/JTE20180728.htm |
Statistical evaluation and performance analysis of electrical discharge machining (EDM) characteristics of hard Ti-6Al-2Sn-4Zr-2Mo alloy | Perumal A, Azhagurajan A, Baskaran S, Prithivirajan R, Narayansamy P | Material Research Express | 2019-2020 | https://doi.org/10.1088/2053-1591/ab06da |
Wear behavior of Al 7075/Al2O3/SiC Hybrid NMMC’s by Stir Casting Method | S.Suresh G. Harinath Gowd M.L.S.Devakumar | Materials Today: Proceedings | 2019-2020 | https://doi.org/10.1016/j.matpr.2020.04.275 |
Mechanical and wear Characteristics of Aluminium Alloy 7075 Reinforced with Nano-Aluminium Oxide/ Magnesium Particles by Stir casting Method | S.Suresh G. HarinathGowd M.L.S.Devakumar | Materials Today: Proceedings | 2019-2020 | https://doi.org/10.1016/j.matpr.2020.04.276 |
Parametric Investigations on Friction Stir Welding of Aluminium Alloys | Bazani Shaik , Harinath Gowd , B. Durgaprasad | Emerging Trends in Mechanical Engineering | 2019-2020 | DOI:10.1007/978-981-32-9931-3_33 |
Mechanical and wear behavior of Al 7075/Al2O3/SiC/mg metal matrix nanocomposite by liquid state process | S.Suresh G. Harinath Gowd M.L.S.Devakumar | Advanced Compositesand Hybrid Materials | 2019-2020 | DOI:10.1007/s42114-019-00101-y |
Experimental and parametric studies with friction stir welding on aluminium alloys | Bazani Shaik , Harinath Gowd , B. Durgaprasad | Materials Today: Proceedings | 2019-2020 | https://doi.org/10.1016/j.matpr.2019.07.615 |
A comprehensive study on emission and performance characteristics of a diesel engine fueled with nanoparticle-blended biodiesel | Yuvarajan Devarajan, Beemkumar Nagappan, Ganesan Subbiah | Environmental Science and Pollution Research | 2019-2020 | https://doi.org/10.1007/s11356-019-04446-1 |
Experimental investigation on mechanical properties of Al7075/Al2O3/Mg NMMC’s by stir casting method | S Suresh, G Harinath Gowd and M l S Deva Kumar | Sadhana | 2018-2019 | https://doi.org/10.1007/s12046-018-1021-9 |
Synthesis of electrical discharge metal matrix composite coating through compacted semi-sintered electrode and its tribological studies | Ilangovan Arun, C. Yuvaraj , P. Selvarani, J. S. Senthilkumaar, S. Thamizhmanii, P. Muruganandam | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2018-2019 | https://doi.org/10.1007/s40430-019-1718-7 |
Influence of Multi-hole Technique on Fabrication of Surface Nanocomposite by Friction Stir Processing | Parumandla Naresh and Adepu Kumar | Advances in Manufacturing Processes, Lecture Notes | 2018-2019 | https://doi.org/10.1007/978-981-13-1724-8_51 |
Performance improvement of cryogenic turning process during machining of 17-4 PH stainless steel using multi objective optimization techniques | Potta Sivaiah , D. Chakradhar | Measurement | 2018-2019 | https://doi.org/10.1016/j.measurement.2018.12.094 |
Determination of strength parameters of glass fibers reinforced composites for engineering applications | M. Muralidhar Singh, Harinandan Kumar, G. Hemath Kumar, P. Sivaiah & K. V. Nagesha, K. M. Ajay, G. Vijaya | Silicon | 2018-2019 | https://doi.org/10.1007/s12633-019-0078-3 |
Effect of cryogenic coolant on turning performance: a comparative | Sivaiah Potta | Sn Applied Sciences | 2018-2019 | https://doi.org/10.1007/s42452-018-0078-8 |
Characterization of Musa paradisiaca L. Cellulosic Natural Fibers from Agro-discarded Blossom Petal Waste | R. Prithivirajan, P. Narayanasamy, Naiyf sulthan al-harbi, P. Balasundar, R. Shyamkumar, K. Pommurugan, T. Ramkumar & S. Senthil | Journal of Natural Fibers | 2018-2019 | https://doi.org/10.1080/15440478.2019.1588826 |
Statistical evaluation and performance analysis of electrical discharge machining (EDM) characteristics of hard Ti-6Al-2Sn-4Zr-2Mo alloy | Perumal, A. Azhagurajan, S. Baskaran, R. Prithivirajan & P. Narayansamy | Material Research Express | 2018-2019 | https://doi.org/10.1088/2053-1591/ab06da |
Development of Black Corrosion-Resistant Ceramic Oxide Coatings on AA7075 by Plasma Electrolytic Oxidation | Ramesh Babu Nagumothu, Arunnellaiappan Thangavelu, Arun Mohan Nair, Arun Sukumaran, Tomson Anjilivelil | Trans Indian Inst Met | 2018-2019 | https://doi.org/10.1007/s12666-018-1459-9 |
Synthesis of electrical discharge metal matrix composite coating through compacted semi-sintered electrode and its tribological studies | Arun Ilangovan, C. Yuvaraj, Selvarani P, Senthilkumaar J S, Thamizhmanii. S, Muruganandam. P | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2018-2019 | https://doi.org/10.1007/s40430-019-1718-7 |
Experimental investigation of tool wear in cryogenically treated insert during end milling of hard Ti alloy | Vinothkumar Sivalingam, Jie Sun, Baskaran Selvam, Pradeep Kumar Murugasen, Bin Yang, Saad Waqar | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2018-2019 | https://doi.org/10.1007/s40430-019-1612-3 |
Unsteady mixed convection past a circular cylinder using ghost fluid cascaded lattice Boltzmann method (GF-CLBM) | Vidyasagar Ravindra, Sampath Kumar Chinige, Kameswararao Anupindi, Arvind Pattamatta | Int J Adv Eng Sci Appl Math | 2018-2019 | https://doi.org/10.1007/s12572-018-0232-y |
Investigation on behavior of diesel engine performance, emission, and combustion characteristics using nano-additive in neat biodiesel | Yuvarajan Devarajan, Dinesh Babu Munuswamy, Arulprakashajothi Mahalingam | Heat and Mass Transfer | 2018-2019 | https://doi.org/10.1007/s00231-018-02537-2 |
Experimental evaluation of combustion, emission and performance of research diesel engine fueled di-methyl- carbonate and biodiesel blends | Yuvarajan Devarajan | Atmospheric Pollution Research | 2018-2019 | https://doi.org/10.1016/j.apr.2018.12.007 |
Comparative experimental study on parabolic trough collector integrated with thermal energy storage system by using different reflective materials | Nagappan Beemkumar, Devarajan Yuvarajan, Alagu Karthikeyan, Subbiah Ganesan | Journal of Thermal Analysis and Calorimetry | 2018-2019 | https://doi.org/10.1007/s10973-018-07989-6 |
Effect of di-ethyl-ether on biodiesel fueled diesel Engine | A. Devaraj, Yuvarajan Devarajan & Kanna I. Vinoth | International Journal of Ambient Energy | 2018-2019 | https://doi.org/10.1080/01430750.2018.1557546 |
Wear behaviour of Al 7075/SiC/Mg metal matrix nano composite by liquid state process | S. Suresh, G. Harinath Gowd & M. L. S. Deva Kumar | Advanced Composites and Hybrid Materials | 2018-2019 | https://doi.org/10.1007/s42114-018-0054-1d |
Multi response optimization of laser beam micromilling using Taguchi based grey relational analysis | V. Chengal Reddy,G. Harinath Gowd, M.L.S. Deva Kumar | International Journal of Mechanical Engineering and Technology (IJMET) | 2018-2019 | Volume 9, issue 10, October 2018, pp. 1043–1050 |
Influence of Microstructure on the Nanomechanical Properties of Polymorphic Phases of Poly vinylidene fluoride | Suresh Guduru, Sanjay Jatav, G Mallikarjuna chari, M. S. Ramachandra Rao, Pijush Ghosh, and Dillip Kumar Satapathy | The Journal of Physical Chemistry B | 2018-2019 | https://doi.org/10.1021/acs.jpcb.8b05972 |
Effect of Al2O3 and SiC Nano Reinforcements on Microstructure, Mechanical and Wear Properties of Surface Nanocomposites Fabricated by Friction Stir Processing | Naresh Parumandla, Kumar Adepu | Materials Science | 2018-2019 | http://dx.doi.org/10.5755/j01.ms.24.3.18220 |
Effect of tool shoulder geometry on fabrication of Al/Al2O3 surface nano composite by friction stir processing | Naresh Parumandla & Kumar Adepu | Particulate Science and Technology | 2018-2019 | https://doi.org/10.1080/02726351.2018.1490361 |
Modeling and optimization of sustainable manufacturing process in machining of 17-4 PH stainless steel | P. Sivaiah , D. Chakradhar | Measurement | 2018-2019 | https://doi.org/10.1016/j.measurement.2018.10.067 |
Tool Wear Analysis of Micro End Mills - Uncoated and PVD Coated TiAlN & AlTiN in High Speed Micro Milling of Titanium Alloy - Ti-0.3Mo-0.8Ni | P. Sivaiah, P. Mallikarjuna, B. Uma, K. Venkata Chalapathi | I-Manager’s Journal on Mechanical Engineering | 2018-2019 | https://doi.org/10.26634/jme.8.4.14190 |
Effect of Feed Rate and Constant D.O.P. by Burnishing Process on Non-Ferrous Metals | Chakradhar Bandapalli, Bharatkumar Mohanbhai Sutaria, Dhananjay Vishnu Prasad Bhatt, Kundan Kumar Singh | Procedia CIRP | 2018-2019 | https://doi.org/10.1016/j.procir.2018.08.191 |
Elevated corrosion in strain hardened Al-Mg alloy | S.Thamizhmanii, J.S.Senthilkumar, Arun I and Sulaiman Hasan | Proceedings of the World Congress on Engineering 2018 Vol II | 2018-2019 | WCE 2018, July 4-6, 2018, London, U.K. |
Microstructure, Structure, Mechanical, and Salt Fog Resistance Properties of Titanium Nitride Films on AZ31B Mg-alloy | Neetu, Subhash Singh, P. Nageshwar Rao, R. Jayaganathan, A. Midathada, Kartikey Verma, Uday K. Ravella | Vacuum | 2018-2019 | https://doi.org/10.1016/j.vacuum.2018.09.010 |
Adsorption isotherms, kinetics and thermodynamic simulation of CO2-CSAC pair for cooling application | Shankernath V , Lakshun Naidu K, Ghanashyam Krishna M, Padmanabhan K. A | National Conference on Physics and Chemistry of Materials | 2018-2019 | 27th - 28th December 2018, Indore - India |
Adsorption isotherms, kinetics and thermodynamic simulation of CO2-CSAC pair for cooling application | Vinod Kumar Singh, E. Anil Kumar, Bidyut Baran Saha | Energy | 2018-2019 | 10.1016/j.energy.2018.07.063 |
Statistical analysis of Co-efficient of friction during dry sliding wear behaviour of TiC reinforced Aluminium Metal Matrix Composites | Baskaran S, Anandakrishnan V | Materials Today: Proceedings | 2018-2019 | https://doi.org/10.1016/j.matpr.2018.03.009 |
Experimental Investigations on Friction Stir Welding Process to Join Aluminum Alloys | Bazani Shaik Dr. G. Harinath Gowd, Dr. B. Durgaprasad | International Journal of Applied Engineering Research | 2017-2018 | |
Mechanical Behavior of AL 7075 Reinforced with Al2O3 and SIC Nano Particles Fabricated by STIR Casting Method | S. Suresh, G. Harinath Gowd & M. L. S. Deva Kumar | International Journal of Mechanical and Production Engineering Research and Development | 2017-2018 | http://dx.doi.org/10.24247/ijmperdapr201858 |
Processing and Mechanical Testings of 7075 AL Matrix Composite Reinforced with AL2O3 Nano-Particles Fabricated by Stir Casting Route | S. Suresh, G. Harinath Gowd & M. L. S. Deva Kumar | Trans Stellar | 2017-2018 | http://dx.doi.org/10.24247/ijmperdapr201862 |
Deposition and Characterization of Aluminium Thin film Coatings using DC Magnetron Sputtering Process | Muralidhar Singh M, Vijaya G, Krupashankara M S, B K Sridhara, T N Shridhar | Materials Today: Proceedings | 2017-2018 | https://doi.org/10.1016/j.matpr.2018.01.050 |
Analysis and Modeling of Cryogenic Turning Operation Using Response Surface Methodology | P. Sivaiah, D. Chakradhar | Silicon | 2017-2018 | https://doi.org/10.1007/s12633-018-9816-1 |
The Effectiveness of a Novel Cryogenic Cooling Approach on Turning Performance Characteristics During Machining of 17-4 PH Stainless Steel Material | P. Sivaiah, D. Chakradhar | Silicon | 2017-2018 | https://doi.org/10.1007/s12633-018-9875-3 |
Effect of cryogenic coolant on turning performance characteristics during machining of 17-4 PH stainless steel: A comparison with MQL, wet, dry machining | P. Sivaiah, D. Chakradhar | CIRP Journal of Manufacturing Science and Technology | 2017-2018 | https://doi.org/10.1016/j.cirpj.2018.02.004 |
Characterization of cellulosic fibers from Morus alba L. stem | R. Prithivirajan, P. Balasundar, R. Shyamkumar, Naiyf sulthan al-harbi, Shine Kadaikunnan, T. Ramkumar & P. Narayanasamy | Journal of Natural Fibers | 2017-2018 | https://doi.org/10.1080/15440478.2018.1426079 |
Extraction and Characterization of New Natural Cellulosic Chloris barbata Fiber | P. Balasundar, P. Narayanasamy, P. Senthamaraikannan, S. Senthil, R. Prithivirajan & T. Ram Kumar | Journal of Natural Fibers | 2017-2018 | https://doi.org/10.1080/15440478.2017.1349015 |
Influence of helix twisted tape on heat transfer and friction factor in forced circulation V-trough solar water heater | A. Saravanan, J. S. Senthilkumaar, S. Jaisankar & J. Ananth | International Journal of Sustainable Energy | 2017-2018 | https://doi.org/10.1080/14786451.2018.1476352 |
Experimental investigation of process parameters during environment friendly turning process | KM. Senthil Kumar, R. Thirumalai , J.S. Senthilkumar and M. Chandrasekharan. | Ecology, Environment and Conservation Paper | 2017-2018 | Vol 24, Feb. Suppl. Issue, pp. 422-427 |
Wear behaviour of Mg alloys and their composites – a review | Abhijit Dey, Krishna Murari Pandey | International Journal of Materials Research | 2017-2018 | Vol. 109, No. 11, pp. 1050-1070 |
Experimental investigation of top burr formation in high-speed micro-end milling of titanium alloy | Chakradhar Bandapalli, Kundan Kumar Singh, Bharatkumar Mohanbhai Sutaria & Dhananjay Vishnuprasad Bhatt | Machining Science and Technology | 2017-2018 | https://doi.org/10.1080/10910344.2018.1449213 |
Effect of Feed Rate on Difficult to Cut Metals on Surface Roughness and Tool Wear Using Surface Treated and Untreated Tools | S.Thamizhmanii, Dr.C.Yuvaraj, JS Senthilkumar, Arun I and , Sulaiman | Procedia Manufacturing | 2017-2018 | https://doi.org/10.1016/j.promfg.2019.02.032 |
Experimental investigations to reduce unwanted evaporative losses of drinking water from a clay pot | Vijesh V Joshi, Manvendra Tiwari , and A Subba Rao | IOP Conference Series: Materials Science and Engineering | 2017-2018 | https://doi.org/10.1088/1757-899X/377/1/012162 |
Fabrication of Si3N4 thin films on phynox alloy substrates for electronic applications | V. Shankernath, K. Lakshun Naidu, M. Ghanashyam Krishna, and K. A. Padmanabhan | AIP Conference Proceedings | 2017-2018 | https://doi.org/10.1063/1.5028905 |
Structural and vibrational Analysis of hybrid composite marine propeller | A.Praven kumar S.Praveen kumar Sreenivasulubejawada | ELIXIN | 2015-2016 | |
Failure analysis of buttress, acme and modified and square threaded steel is2062 Tie Rods in assembly using FEA | N.Theja B.Sreenivasulu N.satish kumar | ELIXIN | 2015-2016 | |
Optimization of Turning Pross Parameters of AI 6061/si3 N4 MMC using GA | Sreenivasulubejawada G. Sreekanth Reddy | ELIXIN | 2015-2016 | |
Predictive Machine ability of Lm25 aluminum alloy in CNC turning operation with the help of taguchi technique | Shakeela.K Manu ravuri Gunasekhar reddy.G | international journal of innovative Research in science, Engineering technology | 2015-2016 | Vol4 |
Design and analysis of rear under-run protection device for safety of passenger car | V.Nagarjuna, G.Guru mahesh | international journal of advanced engineering research and science | 2015-2016 | Vol-2 |
Failure analysis of a center bearing bracket mount of a propeller shaft in BS-2 buses | M.jeevan Prasad G.Guru Mahesh D.Krishna mohan raju | International journal of Current Engineering and technology | 2015-2016 | Vol 5 |
A Numerical Study On Cavitation In Diesel Fuel Injector | Dr.E.S.Prakash Yankana Gouda Raghavendra.H Ravi.K | IJSART | 2015-2016 | VOL 2 |
BUCKLING ANALYSIS OF TRACTOR TIE ROD SUBJECTED TO COMPRESSIVE LOAD | Ravi.k Raghavendra.k | International Journal Of Mechanical And Industeral Technology | 2015-2016 | VOL 2 |
A Review Diverse Materials Applied For Additive Manufacturing | P.Mohammed Rizwan Alli C.Reddy Hara Theja Syed Mahammad Syed Saheb C.Yuvaraj | Interational Journal for Research in applied &engineering | 2015-2016 | VOL 3 |
Experimental Studies On Austenitic Stainless Steel Using Co2 Laser Cutting Machine | U.Naga Raju P.Rajesh T.Visnuvardhan G.Harinath Gowd | ELIXIN | 2015-2016 | |
Experimental And Parametric Studies Nd:Yag Laser Drilling On Austenitic Stainless Steel | P.RAJESH U. NAGARAJU G.HARINATH GOWD T.VISHNU VADHAN | International Journal Of Manufacturing Technology | 2015-2016 | DOI 10.1007/S00170-015-7639-4 |
Vibration Properties Of 3d Printed/ Rapid Prototype Parts | S.Krishna Chaitanya Dr.K Madhavareddy Sai Nagasri Harsha,Ch | international journal of innovative Research in science, Engineering technology | 2015-2016 | VOL 4 |
Response characteristics of super tall building effects of number of sides and helical angle | Y.C.kim E.K.bandi A.yoshida Y.Tamura | Journal of wind engineering and industrial aerodynamics | 2015-2016 | http://dx.doi.org/10.1016/jweia.2015.07.00 |
Microstructural and mechanical characterization of TI6AI4V refurbished parts obtained by laser metal deposition | Ramesh Raju Muthukannan Duraiselvam Vijay petley Shweta verma R.Rajendran | Material science & engineering A | 2015-2016 | http://dx.doi.org/10.1016/jweia.2015.07.0 |
Fabrication And Experimental Analysis Of E- Glass Epoxy Lamination\Ts | G.maruthi presad Yadav G.sudhakar H.raghavendra k.jeevan kumar H.M Channabasava swamy F.ismail G Ravi Kishore B.mallikarjuna | Interational Journal Of Mechanical And Industrial Technology | 2015-2016 | Vol3 |
Experimental investigation on the performance of parabolic through solar collector with magnifying glasses | G.maruthi presad Yadav M.Lakanath H.Raghavendra Ksai seetha ram reddy R.satya Narayana reddy B Hanumantha p.chand Basha T.Md irfanulla K.pandu ranga | Interational Journal for Research in applied &engineering | 2015-2016 | Vol3 |
An Experimental Analysis On Tne Effect Of Filler Material Caco3 | G.Maruthi Presad Yadav G.Lokeswara Rao M.Madduleti H.Raghavendra P.Anil Kumar K.Vijeyudu K.S.Mb Yusuf | International Journal Of Engineering Research And Reviews | 2015-2016 | VOL 3 ISS2 |
An Experimental Prototype Of Micro Hydro Power Generation | G.Maruthi Presad Yadav H.Raghavendra K.vijay bhasakar redddy M.ashok K.chakridhar reddy P.S.Gchandra sekhar reddy | International Journal Of Mechanical And Industrial Technology | 2015-2016 | Vol.3 iss 1 |
Experimental investigation on the performance parameters of 4-steoke multi cylinder diesel engine by using diesel and biodiesel with turbocharger | G.Maruthi Presad Yadav H.raganna A.Siva Prasad A.siva K.Sunil kumar K.Nagaraju E.shivashankar goud | International Journal Of Engineering Research And Reviews | 2015-2016 | Vol.3 iss2 |
Experimental and numerical study of the influence of volume fraction on tensile and flexural strength of e glass epoxy cross ply laminations | Dr.yadavalli basavaraj Raghavendra H | Interational Journal Of Mechanical And Industrial Technology | 2015-2016 | Vol 3 issue 1 |
Optimization And Process Parameters Of Cnc End Milling For Aluminum Alloy 6082 | Bathina .Sreenivasulu | Novateur PublicationsInternational Journal Of Innovations In Engineering Research And Technology [Ijiert | 2014-15 | Vol 2,Iss 1jan |
Application Of ANOVA And ANN Technique For Optimize Of CNC Machining Parameters | Bathina .Sreenivasulu | Novateur Publicationsinternational Journal Of Innovations In Engineering Research And Technology [Ijiert | 2014-15 | VOLUME 1, ISSUE |
Optimization of process parameters in drilling of EN 31 steel usingTaguchi method | Adikesavulu.R Sreenivasulu. Bathina Sreenivasulu. Bezawada | Novateur Publicationsinternational Journal Of Innovations In Engineering Research And Technology [Ijiert] | 2014-15 | |
experimental analysis of tubehydroforming | Bathina Sreenivasulu, B Anjaneya Reddy And B Sreenivasulu1 | International Journal Of Mechanical Engineering And Robotics Research | 2014-15 | Vol. 3 No1 |
simulative analysis of tube hydroforming process | B.Sreenivasulu1, G. Prasanthi, T. Naresh Kumar | International Journal Of Research In Engineering And Technology | 2014-15 | |
Optimal Design For Laser Beam Butt Welding Process Parameter For Inconel Using Artificial Neural Networks | Dr. G.Harinath Gowd1, M. Gunasekhar Reddy, Bathina Sreenivasulu, Rayudu Peyyala | International Journal Of Emerging Technology And Advanced Engineering | 2014-15 | Volume 3, Issue 4 |
Failure analysis of buttress, acme and modified and square threaded mild steel(is2062) tie rods | Bathina SreenivasulBathina Sreenivasulu Theja.N S.praveen Kumar | Novateur publications international journal of innovations in engineering research and technology [ijiert] | 2014-15 | Vol 1 |
Design and analysis of a cement mortar lining machine shaft hub and corresponding bolts | M.sreelekha S.praveen Kumar Sreenivasulubejawada | International journal of scientific Research | 2014-15 | Vol 2 |
Optimization of parameters in drilling of EN 31 Steel using Taguchi method | Adikesavulu.R Sreenivasulubejawada Bathina Sreenivasulu | Novateur publications international journal of innovations in engineering research and technology [ijiert] | 2014-15 | Vol 1 |
Design and analysis of a cement mortar lining machine shaft hub and corresponding bolts | M.sreelekha S.praveen Kumar Sreenivasulubejawada | International journal of scientific Research | 2014-15 | Vol 3 |
Structural and modal Analysis of Marine Engine Helical Gear | K.Irshad M,Vamsi Krishna Sreenivasulubejawada | International journal of scientific Research | 2014-15 | Vol 3 |
Evaluation of Mechanical Properties of polyamide-Egg Shell Powder Composite Materials | Challa Ramesh M. vamsi Krishna Sreenivasulubejawada | International journal of science & Technoledge | 2014-15 | |
Harmonic Analysis of Nab Propeller Replaced with composite Material | M.LPavan Kishore R.K.Behera Sreenivasulubejawada | International journal of Current Engineering and technology | 2014-15 | 2347-5161 |
Modeling and coupled field analysis of polysilicon micro gripper using FEA | N.Arun kumar Gunasekhar reddy Sreenivasulubejawada | National monthly journal of Research in science & technology | 2014-15 | Vol 3 |
Design and analysis of a seater race car chassis frame | D.lavanya G.guru mahesh v, ajay Dr.c.Yuvaraj | International journal of Research in aeronautical and mechanical engineering | 2014-15 | Vol 2 |
Modeling And Coupled And Filed Analysis Of Polysilicon Micro Gripper Using FEA | N.arun Kumar Gunasekhar Reddy Sreenivasulubejawada | National monthly journal of Research in science & technology | 2014-15 | Vol 3 |
estimation of compression strength on hybrid composite corrugated sandwich coupons | G.guru Mahesh G.guru saiprasad Dr.Harinath Gowd R.Manu | International journal of Research of Engineering & technology | 2014-15 | VOL 3 |
design and analysis of a single race car chassis frame | G.guru Mahesh D.Lavanya V.ajay Dr. yuvaraj | International journal of Research in aeronautical and mechanical engineering | 2014-15 | VOL-2 |
modeling and thermal analysis of si engine piston using FEM | G.guru Mahesh Dr.Harinath Gowd K.Ramesh babu | International journal of mechanical engineering and robotics Research | 2014-15 | Vol 3 |
Experimental And Analytical Model For Surface Roughness Prediction During Face Turning Operation En 31 In Cnc Machine | K.Sharmila S.Kareemulla, R.Manu | Tractions on engineering and sciences | 2014-15 | Vol.2 |
Effects of electroplating on the mechanical properties of FDM-PLA parts | Naveen kumar TV Mithun V Kulkarni Manu Ravuri | International manager’s journal on Future Engineering & Technology | 2014-15 | Vol.10 – No. 3 |
Predictive Machinability of Lm25 aluminium alloy in CNC turning operation with the help of Taguchi Technique | Shakeela. K Manu Ravuri Guna Sekhar Reddy. G | International Journal of Innovative Research in Science, Engineering and Technology | 2014-15 | Vol.4 |
Estimation of Compression Strength On Hybrid Composite Corrugated Sandwich Coupons | G. Guru Sai Prasad Dr. G. Harinath Gowd G. Guru Mahesh R.Manu | International Journal of Engineering Research and Technology | 2014-15 | Vol 8 |
Design and Fabrication of Paddy Dehusker | P. Megashyam C.Yuvaraj R. Manu | International Journal of Application or Innovation in Engineering & Management | 2014-15 | Vol 3 |
Optimization Of Process Plans For Manufacturing Technique Using Tlbo Algorithm | A.Bhargav K.Ravi | IJSART | 2014-15 | VOL 2 |
Buckling Analysis Of Tractor Tie Rod Subjected To Compressive Load | Raghavendra.k Ravi.k | International Journal Of Mechanical And Industeral Technology | 2014-15 | VOL 2 |
Application Of Anova And Ann Technique For Optimize Of Chc Machining Parameters | N.Prabhakar B.Sreenivasulu U. Nagaraju | Novateur Publications International Journal Of Innovations In Engineering Research And Technology [Ijiert] | 2014-15 | VOL 1 |
Wind-induced responses tall building with various atypical building shapes | Y.C.kim E.K.bandi A.yoshida Y.Tamura H.Tanaka | Journal of wind engineering and industrial aerodynamics | 2014-15 | http://dx.doi.org/10.1016/jweia.2014.07.001 |
Numerical finite element investigation on laser cladding of aerospace components | Ramesh Raju Muthukannan Duraiselvam Vijay petley ArunG.K | Life cycle reliability safety engineering | 2014-15 | Vol 3 issue 3 |
Degradation through erosion mechanistic studies on in 718 superally under hot air jet conditions | K.G Thirugnanasambantham amd S.Natarajan | Journal of material engineering and performance | 2014-15 | DOI:10.1007/s11665-1538-6 |
Sliding Wer Behavior And Its Mechanisums Of Carbonitrided Aisi 8620 Steel At 100 C Under Unlubricated Conditons | R.sankaran D.Rajamani S.Rajamani K.G Thirugnanasambantham | Intitute Of Material Minerals And Mining | 2014-15 | DOI:10.1179/1743294415Y.000000090 |
Degradation mechanism for high temperature erosion in surface modified in718 superalloy | K.G Thirugnanasambantham S.Natarajan | Intitute Of Material Minerals And Mining | 2014-15 | DOI:10.1179/1743294414Y.0000000377 |
modeling and experimental investigation of the sound and emissions performance for 4 stoke multi cylinder with an aqua silencer | G.maruthi Prasad k.nagaraju h.raghavendra B.malli karjuna reddy G.narayana reddy j bharat kumar K.Srikanth K.Jagadesh | International journal for research in applied science engineering technology | 2014-15 | Vol 3 issue5 |
Design Analysis & Optimization Of An Automotive Disc Brake | G.Rajith Kumar S.Thriveni M.Rajasekhar Reddy Dr. G Harinath Gowd | International journal OF Advanced Engineering Researvch And Science | 2014-15 | VOL. 3 ISSU 3 |
Performance Investigation Of Di Diesel Engine With Combined Neem And Pongamia Oil Blends | Manu Ravuri M. Rajasekhar Reddy D.Harsha Vadhan K.Mohammed Muzahid | International journal OF Advancement Engineering Research And technology | 2014-15 | VOL 1 ISSU1 |
Details of Patents Generated at the Department
The Intellectual Property (IP) output of the department has been growing steadily with more number of patents being applied year on year. Given below is a list of patents filed by department faculty in recent years.
2020-21 | ||||
Name | Title of the patent | Submitted | Published | Status |
---|---|---|---|---|
Dr. Ankit Saxena, Dr. Rahul S. Mulik, Dr. Nav Rattan & Dr. Dubba Santhosh Kumar | Fabrication and Analysis of an Artificial Human Hip Joint for Squat Posture. | 19/02/2021 | 26/02/2021 | Filed and Published |
Dr. Nav Rattan, Dr. Rahul S. Mulik, Dr. Ankit Saxena, Ms. Aakanksha & J. Kaushik | Magnetic Field Assisted Travelling Wire Electrochemical Spark Machining (TW-ECSM) Setup. | 04/05/2021 | 21/05/2021 | Filed and Published |
2019-20 | ||||
Name | Title of the patent | Submitted | Published | Status |
Dr. G. Hemanth Kumar, Mr. A. Vasudeva Reddy, Dr. C. Yuvaraj, Dr. H. Mohit | Removal apparatus for cylindrical polymer matrix composite (PMC) parts fabricated by compression cum extruder method | 10/07/2019 | 02/08/2019 | Published |
Dr. G. Hemanth Kumar, Dr. Rajesh Purohit, H. Babu Vishwanath, H. Mohit, N.Karthikeyan | Development of waste nano chicken keratin fiber and Al-SiCnp reinforced hybrid polymer composites | 09/07/2019 | 02/08/2019 | Filed & Published |
H Mohit, Dr. G. Hemanth Kumar, H Babu Vishwanath, Sanjay Mavinkere Rangappa, Dr.-ing. Habil Suchart Siengchin, G.R Arpita | Development of Car Bumper Material Utilizing Sugarcane Nanocellulose, Dry Leaves Fiber, Glass Fiber and Al-SiCnp Reinforced Hybrid Polymer Composites | 070/7/2019 | 02/08/2019 | Filed & Published |
2018-19 | ||||
Name | Title of the patent | Submitted | Published | Status |
Dr. G. Hemanth, H. Babu Vishwanath, Dr. M. Illampoornan, Dr. Harinath Gowd, Dr.H.Mohit | A Novel hole making technique during the thermoforming on Plastic Sheets | 02/05/2019 | 24/05/2019 | Filed & Published |
Dr. G. Hemanth Kumar, Mr. H. Mohit, Dr. Sanjay Mavinkare Rangappa, Mr. H. Babu Vishwanath, Dr. Yogesha | Plants Dry Stem Waste Nano Fiber Reinforced Polymer Composites | 05/03/2019 | 15/03/2019 | Filed & Published |
Dr. G. Hemanth Kumar, A.Vasudeva Reddy, H.Mohit | Unidirectional Manufacturing of Luffa Fiber reinforcement polymer matrix composite through compression through compression cum extruder die set-up for cylindrical parts. | 21/11/2018 | 30/11/2018 | Filed & Published |
Dr.Ilampoornan, Mr.Vikash, Dr.G.Hemanth Kumar | An improved voltage compensation technique for long sag condition using ac chopper. | 13/08/2018 | 17/08/2018 | Filed |
2017-18 | ||||
Name | Title of the patent | Submitted | Published | Status |
Mr. Harinandan kumar, Dr. Muralidhar Singh, M. Hemanth Kumar, Dr. P.Sivaiah, Dr. T. Vishnu Vardhan, Dr. K. V. Nagesha | Utilization of Waste Polyethylene Bags and Fly Ash for Engineering Application | 11/05/2018 | 25/05/2018 | Filed & Published |
Dr. M. Muralidhar Singh, Mr.Harinandan Kumar, Dr. G. Hemanth Kumar, Dr. K. V. Nagesha, Mr. Vijaya. G. | Development of New Thermal Absorber Coatings for Enhanced Solar Application | 12/02/2018 | 16/02/2018 | Filed & Published |
Dr.G.Hemanth Kumar, Dr.C.Yuvaraj, Mr.Harinandan Kumar, Dr.P.Sivaiah, Mr.Prabhu Jayaraman | New Invention of Low-Cost Creep Testing Machine with Variable Temperature and Environmental and Environmental Conditions for Composite Material (PMMC) | 26/12/2017 | 05/01/2018 | Filed & Published |
Dr.P.Sivaiah, Dr.D.Chakradhar, Mrs.B.Uma, Mr.Harinandan Kumar, Dr.G.Hemanth kumar, Mr.P.Mallikarjuna | Apparatus for mist coupled cryogenic cutting fluids delivery system | 26/12/2017 | 05/01/2018 | Filed & Published |
Dr.P.Sivaiah, Dr.D.Chakradhar, Mrs.B.Uma, Mr.Harinandan Kumar, Dr.G.Hemanth Kumar | Jet stream turning holder for cryogenic spray/jet cooling applications | 05/12/2017 | 15/12/2017 | Filed & Published |
Dr. Harinandan Kumar, Dr.G.Hemanth Kumar | Apparatus for Determination of CO2/CH4 Adsorption/Desorption Capacity on Intact as well as Powdered Samples | 06/11/2017 | 17/11/2017 | Filed & Published |
Dr.G.Hemanth Kumar, Mr.H.Mohit, Mr.H.Babu Vishwanath | Development of Dry Leaves Fiber Epoxy Composites for Cupboard Door | 04/09/2017 | 22/09/2017 | Filed & Published |
Dr.P.Kiranna Kumar | A hyper-elastic-boundary-element based surgical-simulator for training surgeons in a few eye-hand-coordination tasks related to minimally invasive surgery | 28/06/2017 | 07/07/2017 | Filed & Published |
Dr.Vijesh Vasanth Joshi | A system for gravity-based dispersion of sublimation material | 04/04/2017 | 22/9/2017 | Filed & Published |
2016-17 | ||||
Name | Title of the patent | Submitted | Published | Status |
Dr.Vijesh Vasanth Joshi | A mixed farming system for crop cultivation and fish farming. | 25/05/2017 | 02/06/2017 | Filed & Published |
Revenue generated from consultancy
Department faculty are involved in providing engineering consultancy for industry in the areas of heat transfer equipment design and composite materials fabrication. Details of recent consultancy projects taken up by the faculty are provided below.
Name of the teacher-consultants | Name of the facility and department | Name of consultancy project | Consulting/Sponsoring agency with contact details | Year | Revenue generated (INR in Lakhs) |
---|---|---|---|---|---|
Dr. G. Hemath Kumar | Mechanical Engineering | Composite Research | Blendsteel Engineering Pvt Ltd | 2017-2018 | 4.5 |
Dr. Prasanna Kumar Lakshmi Duvvi | Mechanical Engineering | Design of a heat exchanger to be incorporated in the given design for an autoclave | Technoconfluence Intelligent engineering solution Pvt Ltd | 2018-2019 | 0.3 |
Dr. Prasanna Kumar Lakshmi Duvvi | Mechanical Engineering | Coil Design of Evaporators in Ecofrost cold room | Ecofrost Technologies Pvt. Ltd. | 2018-2019 | 0.04161 |
Details of Funded Research Projects in the Department
The department received its first externally funded project in the year 2013-14 and since then the research funding to the department has steadily grown to ₹ 1,42,61,290/- as on today. Given below is a list of funded research projects carried out in the Department in recent years.
Academic Year 2019-20
Funding Agency : DST ; Scheme-CRG
S.No | Name of the Principal Investigator | Department | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|---|
1 | P.I Dr.Srijan Sengupta
Co PI Dr.PBN Prasad Co PI Dr.Harikrishna |
ME
ME Physics |
File Number: CRG/2019/001440 dated:14.12.2019 | Novel in-situ volume contractible metal halide negative electrodes for high performance lithium-ion batteries | 3 years | Rs.32,00,000/- | Approved | Total Amount Rs.32,00,000/- |
Academic Year 2016-17
Funding Agency : DST-SERB
S.No | Name of the Principal Investigator | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|
1 | Dr.I.Arun & Dr.C.Yuvaraj | File No.ECR/2016/000470, dated:08.09.2016 | Investigation and Characterization of Electrical Discharge Coated (EDC) Alloys for Mitigation of Biological Fouling on Maritime Structures. | 3 years | Rs.38,37,690/- | Ongoing | Total Amount Rs.38,37,690/- |
Institute of Engineers, Kolkatta
S.No | Name of the Principal Investigator | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|
1 | Dr. C. Yuvaraj & Mr. Bathina Sreenivasulu | File No. R.4/2/UG/16-17/UG2017049, dated:12.04.2017 | Development of High Strength Material for Micro Air Vehicle Structures | 1 year | Rs.25,000/- | Completed | Total Amount Rs.25,000/- |
Institute Funded
S.No | Name of the Principal Investigator | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|
1 | Dr. C. Yuvaraj | TEQIP-II/Seed Grant/MITS/Dec 2016 | Design and Development of mixing equipment for producing SS 3161 – CNT composites by Metal injection molding process | 6 months | Rs.50,000/- | Completed |
2 | Dr John Baruch | TEQIP-II/Seed Grant/MITS/Dec 2016 | Studies on Wear Behavior of H20 Steel parts produced by Additive Manufacturing | 6 months | Rs.60,000/- | Completed |
3 | Dr. K. V. P. Chakradhar | TEQIP-II/Seed Grant/MITS/Dec 2016 | Development of Aluminium-Diamond composite for Heat Sink | 6 months | Rs.50,000/- | Completed |
4 | Dr. A. Bala Raju | TEQIP-II/Seed Grant/MITS/Dec 2016 | Stores for smart cities(ATR) | 6 months | Rs.50,000/- | Completed |
5 | Dr.T.Vishnu Vardhan | TEQIP-II/Seed Grant/MITS/Dec 2016 | Experimental investigations & Optimization of process parameters on various drilling techniques to reduce the delamination of GFRP composites | 6 months | Rs.55,000/- | Completed |
6 | Mr. M. Vamsi Krishna | TEQIP-II/Seed Grant/MITS/Dec 2016 | Enhancement of Tar Cracking Efficiency using Nano Catalyst for Biomass Gasification | 6 months | Rs.50,000/- | Completed |
7 | Dr. S. Bhaskaran | TEQIP-II/Seed Grant/MITS/Dec 2016 | Investigation on Wear resistance of high strength aluminum alloy under cryogenic treatment | 6 months | Rs.50,000/- | Completed |
8 | Dr. G. Sayiram | TEQIP-II/Seed Grant/MITS/Dec 2016 | Development of Laser Peening of Gas Tungsten Arc Welding for Inconel 800H and Stainless steel AISI 321 Dissimilar Metals | 6 months | Rs.50,000/- | Completed | Total Amount Rs.4,15,000/- |
Academic Year 2015-16
Funding Agency: DST-SERB
S.No | Name of the Principal Investigator | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|
1 | Dr.P.Suryanarayana raju | File No. YSS/2014/000894, dated:18.09.2015 | Simulation and Analysis of Fire Accidents in Passenger Train Cars | 3 years | 25,79,600 | Ongoing |
2 | Dr. G. Harinath gowd | File No. SB/FTP/ETA-0178/2014, dated:20.07.2015 | Experimental Investigations and Hybrid Approach for Modelling and Multi Objective Optimization of Pulsed Laser Milling of Micro-Channels | 3 years | 34,39,000 | Completed | Total Amount Rs.60,18,600/- |
Academic Year 2014-15
Funding Agency: UGC-SERO MINOR PROJECT
S.No | Name of the Principal Investigator | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|
1 | Mr Gunasekhar Reddy M | File No. MRP-6098/15(SERO/UGC), dated:01.01.2015 | Design and Development of Hybrid Vehicle for Physically Challenged Persons | 2 years | Rs.3,30,000/- | completed |
2 | Mr Bathina Sreenivasullu | File No. MRP-6099/15(SERO/UGC), dated:01.01.2015 | Analysis and Optimization of Tube Hydroforming Process Parameters for Corrosion Resistance Material | 2 years | Rs.3,85,000/- | completed | Total Amount Rs.7,15,000/- |
Academic Year 2013-14
Funding Agency: Institute of Engineers,Kolkatta
S.No | Name of the Principal Investigator | Sanctioned Letter Number with date | Project Title | Duration of the Project | Total Sanctioned Amount | Status of the Projects |
---|---|---|---|---|---|---|
1 | Dr. C. Yuvaraj & Mr. Bathina Sreenivasulu | File No. R.4/2/UG/13-14(IE), dated:23.10.2013 | Design and Fabrication of Multi-Crop Smashing Combination Thresher | 1 year | Rs.50,000/- | Completed | Total Amount Rs.50,000/- |
Faculty
The highly qualified faculty of the department come with varied academic backgrounds and prior experience in academia as well as industry from reputed organizations across the world. Majority of the faculty have Doctoral degrees from premier institutions in India like IITs and IISc as well as from foreign universities. Faculty also have a strong publication record in reputed journals and their works are widely cited in literature. The faculty specializations are spread across the whole spectrum of technological areas that come under the broad discipline of mechanical engineering.
S.No | Name of the Faculty | Designation | Qualification | H-Index (scopus) | Profile |
---|---|---|---|---|---|
1 | Dr. C. Yuvaraj | Professor & Principal | Ph.D. (Bangalore University) | 5 | View Profile |
2 | Dr. M. Lakshmana Rao | Professor & Head | Ph.D. (Osmania University) | View Profile | |
3 | Dr. G. Harinath Gowd | Professor | Ph.D. (JNTUA, Anantapur) | 9 | View Profile |
4 | Dr. I. Arun | Professor | Ph.D. (NIT, Tiruchirappalli) | 5 | View Profile |
5 | Dr. V. Vamsidhar | Professor | Ph.D. (JNTUA, Anantapur) | View Profile | |
6 | Dr. Ram Krishna | Assoc. Professor | Ph.D. (The University of Leicester, United Kingdom) | View Profile | |
7 | Dr. S. Baskaran | Assoc. Professor | Ph.D. (NIT, Tiruchirappalli) | 8 | View Profile |
8 | Dr. G. Sadasiva Prasad | Assoc. Professor | Ph.D. (JNTUA, Anantapur) | View Profile | |
9 | Dr. K. V. Nagesha | Assoc. Professor | Ph.D. (NITK, Surathkal) | 2 | View Profile |
10 | Dr. P. Sivaiah | Assoc. Professor | Ph.D. (NIT, Karnataka) | 13 | View Profile |
11 | Dr. R. Prithivi Rajan | Assoc. Professor | Ph.D. (Anna University) | 10 | View Profile |
12 | Dr. Pradeep Gupta | Asst. Professor | Ph.D. (NIT, Rourkela) | 7 | View Profile |
13 | Dr. Kamlesh Kumar | Asst. Professor | Ph.D. (NIT, Rourkela) | 5 | View Profile |
14 | Dr. Shanmukhasundaram V. R. | Asst. Professor | Ph.D. (BITS Pilani, Hyderabad) | 3 | View Profile |
15 | Dr. Surojit Poddar | Asst. Professor | Ph.D. (IIT, Delhi) | 4 | View Profile |
16 | Dr. Suresh kannan.V | Asst. Professor | Ph.D. (Anna University, Chennai) | 3 | View Profile |
17 | Dr. Anantha Raman L | Asst. Professor | Ph.D. (Anna University, Chennai) | 4 | View Profile |
18 | Dr. Arun Kumar.D | Asst. Professor | Ph.D. (Anna University, Chennai) | View Profile | |
19 | Dr. Bageerathan T | Asst. Professor | Ph.D. (VIT, Vellore) | 2 | View Profile |
20 | Dr. Manish Sharma | Asst. Professor | Ph.D. (SVNIT, Surat) | 14 | View Profile |
21 | Dr. Satyajit Pattanayak | Asst. Professor | Ph.D. (NIT, Mizoram) | 5 | View Profile |
22 | Dr. Rahul Singh | Asst. Professor | Ph.D. (MNNIT, Allahabad) | 5 | View Profile |
23 | Dr. Awinash Kumar | Asst. Professor | Ph.D. (NERIST, Nirjuli) | 3 | View Profile |
24 | Dr. Amar Sheelwant | Asst. Professor | Ph.D. (BITS Pilani) | 2 | View Profile |
25 | Dr. Krishna Chaitanya Katakam | Asst. Professor | Ph.D. (NIT, Rourkela) | View Profile | |
26 | Dr. Renjith Krishnan | Asst. Professor | Ph.D. (NIT, Mizoram) | View Profile | |
27 | Mr. G. Kumar | Asst. Professor | M.E., (Ph.D.) (VELS, Chennai) | View Profile | |
28 | Mr. Muthu Laxmanan | Asst. Professor | M.E., (Ph.D.) (SIMATS University) | View Profile | |
29 | Mr. S. Manoj Kumar | Asst. Professor | M.E., (Ph.D.) (Anna University) | View Profile | |
30 | Mr. H. Raghavendra | Asst. Professor | M.Tech., (Ph.D.) (JNTUA, Ananthapuramu) | View Profile | |
31 | Mr. Pujari Rajesh | Asst. Professor | M.Tech., (Ph.D.) (NIT, Tiruchirappalli) | View Profile | |
32 | Mr. Jagannath Pattar | Asst. Professor | M.Tech., (Ph.D.) (SSAHE, Tumkur) | View Profile | |
33 | Ms. Kumari Ambe Verma | Asst. Professor | M.Tech., (Ph.D.) (NIT, Silchar) | 5 | View Profile |
34 | Mr. Dhrubajit Sarma | Asst. Professor | M.Tech., (Ph.D.) (NERIST, Nirjuli) | 1 | View Profile |
35 | Ms. Rupshree Ozah | Asst. Professor | M.Tech., (Ph.D.) (NERIST, Nirjuli) | 2 | View Profile |
36 | Mr. Mohammed Yaseen Kotwal | Asst. Professor | M.Tech. | View Profile | |
37 | Mr. N. Siva Balaji | Asst. Professor | M.Tech. | View Profile | |
38 | Ms. Amruta Panda | Asst. Professor | M.Tech. | View Profile |

Department Infrastructure
To facilitate effectual teaching and learning activities, the department has excellent infrastructure, which includes:
- Air-conditioned seminar hall
- State-of-the-art digital classroom
- All IT enabled classrooms
- Classrooms with sound systems
- Well-equipped laboratories
- Continuously upgraded computer facilities
- Well-stocked Department library
- Research Labs
The department has ample labs, even beyond curriculum requirements, which are used by students from all years of study. The labs are allotted to the students for every week as per the timetable. Apart from the regular labs, research lab is also available for faculties and students to carry out their research and project work.The maintenance of infrastructure and facilities at the Department is carried out in a timely and thorough manner to ensure maximum availability and minimum downtime of the equipment and services. All the lab facilities and services are made available to the students even in the after-hours and holidays to enable their maximum utilization and benefit to the students.

Department Library
The department has a dedicated library for the students which houses the following facilities
- Personal computers: 03
- Number of Volumes: 476
- Project reports: 449
- Lab manuals: 25
- Magazines: 03
Lab Facilities for Academics
The Department of Mechanical Engineering features more than adequate and well-equipped laboratories for running the UG as well as PG programs offered in the Department. The list of the laboratories along with the details of major equipment in each of them is provided below.
Fluid Mechanics and Hydraulic Machines Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Thermal Engineering Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Mechanics of Solids Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Machine Tools & Metrology Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Manufacturing Technology Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
CAD/CAM Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Heat Transfer Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Instrumentation & Control Systems Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Machine Dynamics Lab | |
---|---|
Major Equipment in this lab include:
|
![]() |
Work Shop | |
---|---|
Major Equipment in this lab include:
|
![]() |
Research Labs in the Department
For students who take up projects, both as
part of the curriculum or as
a co-curricular activity, support is provided by the
Department in terms of provision of
facilities. Based on the type of research and project work
(i.e. Design or Manufacturing or
Thermal or Simulation or Modeling) department provides the
facilities for students
(Under Graduate, Post Graduate, and Ph.D) as well as for
faculty research with well-equipped
laboratories, analytical instruments and space.
We recognize that the quality and accuracy of student
project results are of the
highest significance in research. We therefore strive to
ensure that all the equipments
in our laboratory are in fine shape always and they are
calibrated periodically by using
traceable standards. Students utilize the facilities for
their mini projects as well as
major projects. These facilities are also used by other
branch of engineering students
from our institute as well by other institutions. We also
network with other department
laboratories to enhance the quality of the project.
Centre for Advanced Material Processing | |
---|---|
Student projects completed:
|
![]() Electrical Discharge Machining Specifications
|
Salt spray corrosion
tester
|
![]() |
Pin-on-disc Tribometer
|
![]() |
Metallurgical
Microscope
|
![]() |
Digital Weighing
Machine
|
![]() |
Hot Mounting Press
|
![]() |
Belt Grinder
|
![]() |

Seminar Hall
For technical, co-curricular and
extracurricular activities and also
cultural programs, students are free to use air-conditioned
seminar hall which is fully
equipped with projectors and sound system. Students utilize
this facility regularly to
conduct events as per their academic as well as non-academic
needs.

Industry Related Labs
Students in the Department benefit from the following industry connected labs established in the institution with support from Andhra Pradesh State Skill Development Corporation (APSSDC) in association with SIEMENS and Dassault Systemes.
APSSDC Dassault Systems Centre of Excellence
This Centre of Excellence is established in September 2018. The broader goal of this Centre is to improve the core placements for engineering graduates. Training is being offered to students in the Dassault 3DS, a leading software suite for complete Product Life-Cycle Management (PLM) activities. Students are trained in each individual tool in the suite in a sequential manner starting from the basic design software and working up to more sophisticated analysis tools. This entire training program is designed by experts from Dassault Systems and their training partners.
APSSDC SIEMENS TSDI
This cluster of labs collectively known as SIEMENS Technical Skill Development Institute (TSDI) comprises of the following labs:
- Design - Computer Based Training (CBT) Lab
- Manufacturing - Computer Numerical Control (CNC) Lab
- Manufacturing - Welding Lab
- Refrigeration and Air Conditioning (R&AC) Lab
- Electrical - home Lab
Skills training is being continuously provided in these labs to students in employability skills like design and modeling using CAD software, CNC programming, Welding technologies, R & AC, and electrical technologies. The content and delivery of these training is designed and monitored by SIEMENS and their partnering industrial entities. The summary of activities is given below.
Computer Based Training (CBT) Lab | |
---|---|
Equipment Available
|
![]() |
Computer Numerical Control (CNC) Lab |
Equipment Available:
|
![]() |
Refrigeration and Air Conditioning (R&AC) Lab |
Equipment Available:
conditioning Units (A)
Supply of Refrigeration Units (B)
|
![]() |
Welding Lab |
Equipment Available:
|
![]() |
Electrical - home Lab(CNC) Lab |
Equipment Available:
|
![]() |
Faculty Achievements
- One Day workshop on Creating Road map for Innovation and Incubation Centres in AP Educational Institutions, organized by ITE&C department on 19-10-2016 at Gateway Hotel in Vijayawada.
- A workshop on “Quality Initiatives in Technical & Higher Educational Institutions (in compliance with NBA & NAAC Accreditation)” organized by Engineering Staff College of India (ESCI), Hyderabad, from 07-09-16 to 9-09-16.
- 3rd International Conference in Transformations in Engineering Education (ICTIEE 2016) was organized by IUCEE (Indo-US Collaboration for Engineering Education) and College of Engineering, Pune (COEP) during 08-12 January 2016.
- An Orientation Session on “Siemens Centres of Excellence (COE) Clusters in AP” organized by Andhra Pradesh State Skill Development Corporation at the Sri City Business Centre, Sri City on 27th August 2015.
- A one-day workshop on “Awareness on Various programs for Foreign University Collaborations” was Organized at JNTUA, Ananthapuramu on 16th May 2015.
- A meet in Chennai conducted by Higher Education Forum, South Zone to receive Campus Preparedness Award 2015 on 26th March 2015.
- A workshop on TEQIP-II : Good Governance, Leadership and Management on 14th - 15th October 2014 at Metropolitan Hotel, Near Bangla Sahib Gurudwara Road, New Delhi.
- Represented the college for the workshop on Procurement Practices attended on 22.08.2014, at PSG Institute of Technology, organized by PSG, SPFU-TN and NPIU at Coimbatore.
- Attended a National Conference on “Leadership in Higher Education” held on July 4, 2014 at Engineering staff college of India (ESCI), Hyderabad.
- One day workshop on “Academia Industry Management For creating Sustainable Employability” held on 06-04-2014 Organized by GP Birla Institute of Human Excellence, Birla Center, Hyderabad.
- Participated in a Seminar on “Innovative Teaching, Research Learning & Accreditation Practices” (IE-ITR SESSION) organized by ESCI as the constituent part of IE(I) Congress-2013 on 21 December, 2013 at Hotel Leela Palace, Chennai.
- Appointed as the coordinator of the program by AICTE and received a grant from AICTE to conduct 2 Weeks FDP On Fatigue & Fracture Mechanics In FE Analysis.
- A Two Day Workshop on “Recent Trends In Manufacturing “ Under TEQIP-II Organized by the Department of Mechanical Engineering, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad on 29-30 July 2013.
- A Two Day Workshop on “Procurement Guidelines & PMSS Training" under TEQIP-II conducted by NPIU - New Delhi and SPFU Andhra Pradesh at University College of engineering, Osmania University, Hyderabad on 16-17 May 2013.
- “A Study of Transition Wear Behavior of Alumina Particle Reinforced Al6061 MMCs” Published in the Journal of Reinforced Plastics and Composites, Vol.28,No.23/2009, SAGE Publications 2009, London and Also this journal paper is available in the website jrp.sagepub.com, by Dr.C.Yuvaraj.
- “Optimization of Machinability Parameters of Aluminium/Alumina Metal Matrix Composites” Published in the International Journal of Applied Engineering and Research, ISSN 0973-4562 Volume 3, Number 9 (2008), pp.1197-1203, Research India Publications, by Dr. C. Yuvaraj.
- “Study on Transition Behavior of Al/Al2O3 MMCs” Published in the special issue of World Journal of Engineering, ISSN: 1708 – 5284, Volume.5, Number.4 (2008), pp.543-544, Sun Light Publishing, Canada, by Dr.C.Yuvaraj.
- “Effect of Thermal Fatigue Behavior on Bending strength of Al/Al2O3 MMCs” Published in the International Journal of Applied Engineering and Research, ISSN 0973-4562 Volume 5, Number 7 (2010), pp. 1197-1202, Research India Publications, by Dr. C. Yuvaraj.
- “Effect of Drilling Parameters on Drillability Behavior of Al/Al2O3 MMCs” Published in the International Journal of Applied Engineering and Research, ISSN 0973-4562 Volume 5, Number 7 (2010), pp. 1203-1213, Research India Publications, by Dr. C. Yuvaraj.
- One Day workshop (28 September,2012) on “Metallurgy For Non-Metallurgists” (MNM-2012) organized by Indian Institute of Metals, Hyderabad Chapter on 28th September 2012.
- Principal Investigator for the project “DEVELOPMENT OF HIGH STRENGTH MATERIALS FOR Micro Air Vehicle STRUCTURES “.
- Participated in an interactive session with Dr. U. Chandrasekhar, Director, ESCI & Gp Capt B.S. Phillora, Head Management , Technology & Information Divisions, Engineering Staff College of India at Hyderabad on 14th December 2013.
- Visited Nagarjuna Fertilizers and Chemicals Limited (NFCL) Hyderabad on 26 - 27 August 2015.
- Visited Rayalaseema Thermal Power Plant (RTPP), Muddanur, Kadapa Dist on 28th July 2015.
- Participated in Technical Discussion at BHEL, R&D, ARCI and BAG organizations during 20-26 July 2015. The principal objective of the visit was to explore feasibility of seeking Project works for the M.Tech students and Research project for the MITS faculty.
- Visited Central Institute of Tool Design (CITD), Hyderabad on 21st November 2014.
- Attended an exclusive event at CII-Sohrabji Godrej Green Business Center in Hyderabad where elite US scientist and environmentalist Mr. Amory B Lovins delivered a keynote lecture on 12th July, 2014.
- A Two-Day National Summit on Quality in Education from 18-11-16 to 19-11-2016 organized by CII – Confederation of Indian Industry at CII Institute of Quality, Bengaluru.
- The two day summit on Waste Management - Resource Management for Sustainable future was organized by the CII - Sohrabji Godrej Green Business Centre at Bangalore on 23-24 November 2017.
- A Two-day workshop on Restructuring and Redesigning the Higher Education Curriculum to Meet Industry Needs organized by CII Southern Region at Jeppiaar Engineering College, Chennai, during 23 - 24 August 2017.
- Visited M/S Murugappa Group and M/s Rane (Madras) Group on 15.12.2017 at Chennai.
- Visited TI Metal Forming Ltd.in Tirunindravur, Chennai and TIDC India Ltd. at Ambattur, Chennai 53 on 16.12.2017.
- Management Capacity Enhancement Programme for the 11th batch from 12th January to 18th January 2015 at Indian Institute of Management, Indore, Madhya Pradesh.
- 2-Day "Workshop on Avoiding Plagiarism" organized by Shri Dharmasthala Manjunatheshwara Institute for Management Development (SDMIMD), Mysore, 3rd & 4th July 2014.
- ”Synthesis and characterization of Hardwickia binata fiber with epoxy” in a Three day International Mechanical Engineering Congress 2014 (IMEC 2014) organized by the Department of Mechanical Engineering NIT ,Tiruchirappalli, Tamil Nadu, India during 13-15 June 2014.
- ” Modeling & Analysis of End Milling Process parameters using Artificial Neural Networks” in a Three day International Mechanical Engineering Congress 2014 (IMEC 2014) organized by the Department of Mechanical Engineering NIT, Tiruchirappalli, Tamil Nadu, India during 13-15 June 2014.
- ” Experimental Investigations & Effects of Cutting Variables on MRR and Tool Wear for AISI S2 Tool Steel” in a Three day International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014) organized by the Department of Mechanical Engineering NITK Surathkal from March 27/03/2014 to 29/03/2014.
- Participated in a Two Day Conclave on Quality Technical Education and Research Organized by Dept. of Mechanical and Aerospace Engineering, IIT Hyderabad campus on 7th and 8th March, 2014.
- Appointed as Reviewers for International Journal For Technology Enhancements and Emerging Engineering Research (IJTEEE).
- ”Modeling & Analysis of performance characteristics of Wire EDM of SS304” in an International Journal of Innovative Technology and Exploring Engineering (IJITEE),ISSN: 2278-3075, Volume-3, Issue-4, September 2013,pp:122-125.
- “A GA approach to the optimization of Laser Beam Welding” in an International Journal of published by German publisher LAP (Lambert Academic Publishing),ISBN-13:978-3-659-32090-3,ISBN-10: 3659320900,EAN: 9783659320903,Book language: English.
- “Empirical Modeling of weld bead geometry in Nd:YAG laser welding of Inconel 600 using genetic programming” in International Conference on INTELLIGENT MANUFACTURING SYSTEMS (ICIMS 2012) Organized by School of Mechanical Engineering, SASTRA University,Thanjavur Tamil Nadu,India.
- “Empirical Modeling of Hard Turning process of Inconel using Response Surface Methodology” in an International Journal of EMERGING TECHNOLOGY AND ADVANCED ENGINEERING. (ISSN 2250-2459, Volume 2, Issue 10, October 2012).
- “A Genetic Algorithm Approach to the Optimization Of Process Parameters In Laser Beam Welding"in an International Journal of Mechanical Engineering and Technology Volume 3, Issue 3, December (2012), pp. 459-470. ISSN 0976 – 6340 (Print), ISSN 0976 – 6359.
- ”Optimal Design for Laser Beam Butt Welding Process Parameter for Inconel Using Artificial Neural Networks” in an International Journal of Emerging Technology and Advanced Engineering, ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 4, April 2013.
- “Experimental Investigations on the effect of Cutting Variables on the material removal rate and tool wear for AISI SI Steel” in the Indian Journal of Applied Research, ISSN -2249-555X, Volume 3, Issue 5, Pp:211-213,May 2013.
- “Modeling and Analysis of FSAE Car disc Brake using FEM" in The International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 9, September 2013,pp-383-389.
- "Effect of Process Parameters on the Bead Geometry of Laser Beam Welded Inconel Sheets" in an International Journal of Advanced Manufacturing Systems , ISSN : 2229-5860 , Vol.4, No.1(June-2013),Pp: 29-41.
- “Prediction & Optimization of End Milling Process Parameters Using Artificial Neural Networks" in The International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 9, September 2013,pp-117-122.
- Participated in 5 Day Workshop on “NBA & NAAC Accreditation Process” Sponsored by AICTE under Margadarshana Scheme at M S Ramaiah Institute of Technology, Bengaluru on 10th Dec - 14th Dec 2018.
- One Week Workshop on Advanced Materials & Manufacturing Methods Conducted by Department of MME, NIT, Trichy, Tamilnadu on 6 - 10 June 2016.
- A Two-Day Workshop on Patent Information Cell Organized by Sri Padmavathi Mahila Visvavidyalayam (Womens University), Tirupati on 30 - 31 March 2016
- 7 days training programme on “Training on Management Capacity Enhancement (Batch 8) for Administrators” organized by IIM Indore with NPIU during March 20 - 26, 2014, under TEQIP II program.
- Participated in 15th International Conference on Polymer Science and Technology & Delivering Scientific Talk in the SPSI MACRO 2018 Conference in IISER-Pune and CSIR-NCL Pune in Maharashtra on 19 - 22 December 2018.
- Visited to Bangalore Integrated System Solutions (BISS) & Central Manufacturing Technology Institute (CMTI), Bangalore on 15th November 2018.
- Visited to Rayalaseema Thermal Power Project on 3rd November 2018.
- Visited to Bangalore Integrated System Solutions (BISS) & Central Manufacturing Technology Institute (CMTI), Bangalore on 15th November 2018.
- Participated in One Day ICTIEE 2019 ‘Engineering Education Research’ at Malla Reddy Engineering College, Hyderabad on January 06, 2019.
- Participated in International Conference on Nanoscience and Nanotechnology (ICONN) at SRM Institute of Science and Technology Kattankulathur, Tamilnadu on 28 - 30 January 2019.
- Participated in National Conference on Physics and Chemistry of Materials (NCPCM - 2018) on 27 - 28 December 2018.
- Visited to Indian Institute of Science (Bangalore) on 28 December 2018.
- Visited to KIADB Hoskote Industrial Area, Bangalore on 6th December 2018.
- A Two Day International Conference on “Conversations for Advancing “Digital India” and “Make in India” - “Digital Bharat 2015” organized by FICCI at FICCI, Federation House, New Delhi from 14th May to 15th May 2015.
- The Confederation of Indian Industry (CII) organized the tenth edition of its “India Innovation Summit”, on 8th & 9th August 2014 at Hotel ITC Royal Gardenia in Bangalore.
- Participated in the Second World Summit on Accreditation – WOSA-2014 on the theme "International Recognition of Educational Qualifications" organized by National Board of Accreditation during 8-10 March 2014 at Hotel Ashok, New Delhi.
- A five day training program at Chandigarh from 16-12-13 to 20-12-13. The training is called Pedagogical Training (Module-I) and was conducted by Department of Education and Educational Management from National Institute of Technical Teachers’ Training and Research(NITTTR), Chandigarh.
- “CII’s higher education conclave” organized by The Confederation of Indian Industry (CII) held at Hotel Le Meridien, Coimbatore on Nov. 29, 30, 2013. The theme of the conclave is Transformational Change in Higher Education: Global Excellence through Governance, Research and Innovation.
- “Investigations in a locally developed insulated DI diesel engine with newly developed lubricants ”, technology World, an International journal, International Journal Division, F 22, Jalan Gempita 9, Taman Salak south, 57100 Kuala Lumpur, Malaysia, Volume: II, Issue-II, July-August-2010, ISSN 2180-0987, Pp:191-198.
- “Synthesis Comparative Analysis of IDI Diesel Engine Combustion and Emission Parameters Fueled with Ethanol and its Diesel Blends” Paper published in Bonfring International Journal in an International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies 2012,Pages : 635-639, Paper ID : MET17.
- One Day National Workshop on “Advanced Trends in IC Engines and Combustion” hosted by Department of Mechanical Engineering, JNTUH College of Engineering, Hyderabad on 28th February 2013 to mark the retirement of Prof. K. Rajagopal, Former Vice- Chancellor of JNTU.
- A meeting on National Knowledge Functional Hub organized by FICCI on 23rd May, 2013 at GW Precision Tools India Pvt. Ltd. Bangalore.
Dr. C. Yuvaraj
Dr. Suryanarayana Raju Pakalapati
Dr. Prasanna Kumar Lakshmi Duvvi
Dr. Senthil Kumaar J S
Dr. S. Thamizhmanii
Dr. G. Harinath Gowd
Dr. Uday Krishna Ravella
Dr. S. Baskaran
Dr. I. Arun
Dr. G. Sada Siva Prasad
Dr. G. Mallikarjunachari
Dr. R. Prithivi Rajan
Dr. K. V. Nagesha
Dr. P. Naresh
Dr. Muralidhar Singh. M
Dr. Shanker Nath
Dr. Srijan Sengupta
Mr. V. Vamsidhar
Student Achievements
- Ms. C. S. Sowmya Sree, graduated in Mechanical Engineering during the year 2010- 2014 is awarded Gold Medal by Jawaharlal Nehru Technological University Anantapur, Anantapuram in the Sixth Convocation held on 24 th December 2014 in the University campus. She has secured an aggregate of 82% and stood first among all the students of mechanical engg in the JNTUA affiliated colleges.
- Mr.S.Khajapeer an Alumni of MITS, now working with Hyquip Systems Pvt. Ltd, as an Assistant Manager, was at MITS for Alumni Interaction and addressed the students on making their career on 13.08.2014.
- Mr.Md.Mansur (10691A0315) IV B.Tech, Department of Mechanical Engineering participated and presented a paper in A One Day National Technical Symposium prayojana-2k14, Organized by the Department of Mechanical Engineering,Yogananda Institute of Science & Technology ,Tirupati , Chittoor(dist), Andhra Pradesh, on March, 8, 2014 and got ‘First Prize’ in Paper presentation.
- Mr.Md.Mansur (10691A0315) IV B.Tech and Mr.B.Rajesh (11691A0336), III B.Tech, Department of Mechanical Engineering participated and presented papers titled “WANKLE ENGINE” and “RAPID PROTOTYPING” in One Day National Technical Symposium DYNAMECHS'14, Organized by JNTUA , Anantapur(Dt), Andhra Pradesh, March, 16 2014 and secured two ‘First Prizes’ in Paper presentations.
- Mr.Md.Mansur (10691A0315) and Mr.P.Shanawaz(11695A0305) of IV B.Tech, Department of Mechanical Engineering participated and presented a paper titled “Pneumatic Camless Engine” in A ONE Day National Technical Symposium GATES YANTRA-2k14, Organized by GATES Institute of TECHNOLOGY , GOOTY, Anantapur(Dt), Andhra Pradesh, February 26, 2014 and secured ‘First Prize’ in Paper presentation.
- Mr.Md.Mansur (10691a0315) and Mr.S.Girish(10691A0308) of IV B.Tech, Department of Mechanical Engineering participated and presented a paper titled “CAMLESS ENGINE” in A Two Day National Technical Symposium TECHNOVISION-2K14, Organized by Mekapati Rajamohan Reddy Institute of Technology and Science, Udayagiri, Nellore(Dt), Andhra Pradesh, February 22-23 2014
- First prize bagged by Mr.P.V.Rohith (11691A0339) of III B.Tech ME for patriotic poetry in University level Youth festival on 6th & 7th of February conducted by JNTU Pulivendula.
- Ms.Kalauva Gadda Bhavana (12691A0313), Mr. Modem Chethan (12691A0319), Mr. Muralidhar Reddy Sirivella (12691A0356) & Mr.Yeddula Maheswara Reddy (12691A0344) stood topper’s of the college in B.Tech I year 2013.
- Mr.T.Nagabhushanam Reddy (08691A0318) of Mechanical Engg Dept is Congratulated on his Success for being awarded "GOLD MEDAL" for his academic Excellence of the batch 2008-2012 by JNTU, Anantapur.
- Mr.G.Balanarasimha M.Tech Student (11695D1502) and Mr. M.Vamsi Krishna, Assistant Professor, Department of Mechanical Engineering published a paper entitled “A COMPARITIVE STUDY ON ANALYTICAL AND EXPERIMENTAL BUCKLING STABILITY OF METAL MATRIX COMPOSITE WITH FIXED & HINGED ENDS” in the INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH ISSN:0973-4562, VOLUME:9, NUMBER 2(2014) pp.191-196.
- Mr.M.Saran Theja, M.Tech (Machine Design) & Mr.G.Shankar (Alumni of 6-10 Batch) working as Senior Engineer at Hyundai Motor India Limited (HMIL) in Chennai published a paper titled “ Design Analysis of Two Wheeler Lighter Weight Alloy Wheel ” in Indian Journal of Engineering ISSN 2319 – 7757, EISSN 2319 – 7765 (Volume 6, Number 15, November 2013), pp 09-21.
- Mr.G.Bala Narasaimha, II M.Tech-Machine Design, attended two day National workshop on National workshop on “Nano Composites – Synthesis, Characterization and Applications” organized by Vellore Institute of Technology, Vellore, Tamilnadu from October 24 & 25, 2013.
- Mr.K.Chengal Reddy (11695D1516) II M.Tech, published a paper titled “Modeling and Analysis of FSAE Car disc Brake using FEM" in The International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 9, September 2013,pp-383-389.
- Ms.K.Divya Teja , II M.Tech, Department of Mechanical Engineering published a paper titled “Prediction & Optimization of End Milling Process Parameters Using Artificial Neural Networks" in The International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 9, September 2013,pp-117-122.
- Mr.M.Saran Theja, II M.Tech(Machine Design) under the guidance of Mr.M.Vamsi Krishna Asst. professor Dept. of Mechanical Engineering, Published a paper entitled “Structural and Fatigue Analysis of Two Wheeler Lighter Weight Alloy Wheel” in International Organization of Scientific Research (IOSR)., IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) , e-ISSN:2278-1684,p-ISSN:2320–334X.
- Mr.G.Bala Narasimha, Published a paper entitled "A Review on Processing of Particulate Metal matrix Composites and its Properties” in an International Journal of Applied Engineering Research(IJAER), Volume 8, Number 6(2013), pp: 647-666, ISSN :Print:0973-4562, online:1087-1090.
- Mr.M.Saran Theja, published a paper titled ”Static and Thermo-Mechanical Analysis of Disc Brake” in a Global Journal of Engineering , Design & Technology (GJEDT), ISSN 2319-7293, Volume 2, No.3, 2013.Pp:12-18.
- Mr.M.Saran Theja, published a paper titled “Modified Erichsen Cupping Test for Copper, Brass, Aluminium and Stainless Steel” The SIJ Transactions on Industrial, Financial & Business Management (IFBM)(International Journal), Print ISSN: 2321 - 2411 | Online ISSN: 2321 - 242X, Vol. 1, No. 2, May-June 2013, Pp. 52-57.
- Ms.K.Deepika (10691A0307) and Ms.K.Sujatha (10691A0328) of III B.Tech Mechanical Engg Dept bagged First prize for the topic “Performance of Hydrogen as a Fuel” in the paper presentation Category at National Level Symposium organized by SVCE & SVEW, Tirupati Chittoor Dist.-517 112 , A.P on 24-01-2013.
- Mr.B.Sudheer Reddy (2001-2005) is an alumni student at MITS presently working as a Senior Supplier Quality Engineer at UTC Aerospace Systems, Bangalore, conducted a “Guest Lecture” on “Future market for Aerospace Industry and careers” to 3rd Year Mechanical & 4th Year Mechanical Engineering Students on 20th February 2013.
- Ms.D.Lekya (10691A0312) and Ms.C.S.Soumyasree (10691A0326), III ME Students presented a Technical paper entitled “Antilock Braking System” at Mohan Mantra 2013, a National Level Techno & Cultural fest held on - Feb 22,23 2013 at Sree Vidyanikethan Engineering College,Tirupati, Andhra Pradesh
- Mr.C.Dadavalli (10691A0306), Mr.J.Adeppa (11695A0301), Mr.D.Nagendra Rao (10691A0318), Mr.A.Chatrapathi (10691A0305), Mr.D.Phaneeswar (10691A0320), III ME, attended for SRVAGNYA'13 which was held at JNTUA College of Engineering, Pulivendula and bagged First Prize in “Project Presentation” by A.Chatrapathi, C.Dada Valli & D.Phaneeswar. Second Prize in “Poster Presentation” by J.Adeppa & D.Nagendra Rao.
- Mr.Mohammed Mansur (10691a0315), III year B.Tech. Mechanical Engineering Department student has participated and presented paper titled “Automotive spark-ignited direct-injection gasoline engines” in 8th National Level Students Technical Symposium – Technofest 2k13” held at Sri Venkateswara College of Engineering & Technology, Chittoor, Andhra Pradesh on 25th Feb 2013 and won Second prize.
- MS.C.Naganandini (11691A0328) and Ms.A.Sinduja(11691A0342), II year B.Tech. Mechanical Engineering Department student have participated and presented paper titled “Power Generation By Gravity” held at ACE, Madanapalle, Chittoor Dist. A.P. during 1-2 March, 2013.
Faculty Achievements
Student Achievements
Student Placements
Students of the Department are placed in
renowned companies both in core sector companies like:
- Hyundai R & D Hyderabad
- L&T Technologies
- KIA Motors
- NDS Eco Motors
- Stulz
- Suprathek
- Turbo Engineering services
- Pro SIM R & D Pvt Ltd
- Advanced Bolting Solutions Pvt. Ltd
- Surya Tech
- AIR FLOW
- Cyient Technologies
- Amara Raja Batteries
- TCS
- CTS
- Infosys
- Tech Mahindra
Year | No of Eligible Students | Total No of Students Placed |
---|---|---|
2021-2022 | 211 | 132 (in progress) |
2020-2021 | 267 | 174 |
2019-2020 | 235 | 123 |
2018-2019 | 308 | 138 (89 on campus) |
2017-2018 | 250 | 218 (130 on campus) |
2016-2017 | 198 | 156 |
2015-2016 | 70 | 53 |
Student Internships in Industry and Research Organizations
Department of Mechanical Engineering encourages and supports the students to pursue internships in industry, premier academic institutions and reputed research organizations both in India and abroad. The support provided by the Department to students pursuing internships includes:
- Faculty mentors with industry and research credentials advise the students on the importance of internships for achieving the career goals and also help them choose appropriate companies or universities for internships.
- Using their professional networks, faculty of the Department liaise with the companies across India to create internship opportunities for the students.
- Faculty with international work experience counsel the students on selecting the appropriate avenues for foreign internships based on the interests and aptitude of the students.
- Department has entered into numerous MOUs with prestigious organizations to facilitate good number of internship opportunities for the students.
- Financial support towards air fare for foreign internships.
- Self-study option is introduced for final semester courses so that students can spend one full semester on their full-time internships.
- Faculty also offer their technical expertise to the students, often through personal visits to the place of internship, for successful completion of the internships.
Department students are encouraged to pursue an internship at an industry for a period of 12 to 14 weeks in the fourth year second semester. Companies typically provide internship for the students in varied fields like design, tooling, production, quality checks and product testing. The internships also often include a real-time project given to the students, by the host company, so that they can understand the application of the engineering knowledge in solving problems encountered in Industry. The companies also appoint internal project guide for the student teams. At the end of the internship, students required to submit a project report which includes a brief history of the company and its organizational structure in addition to the the details of activities carried out during the internship like product drawings, brief production processes, inspection methods, and the approach used for project tasks.
Through these concerted efforts, the Department was able to realize significant number of student internships. Following is partial list of student internships.
Student International internships:
- Five students from final year Mechanical Engineering program are selected for research internship in Innopolis University - Russia from 12-01-2020 to 10-04-2020.
- Two students from final year Mechanical Engineering program did research internship at Karlsruhe Institute of Technology, Germany, in AY 2018-19.
- One student from final year Mechanical Engineering program did research internship at Nanyang Techological University, Singapore, in AY 2018-19..
Student Internships in Industry
2019-20 | ||
S.No | Name of the Student | Company |
---|---|---|
1 | JAYAPRAKASH. N | Royal Enfield, Chennai |
2 | DINESH. A | NRK Technologies, Hyderabad |
3 | BHARATH. N | NRK Technologies, Hyderabad |
4 | JAGADEESH. B | Tata Lochhead Martin Aerostructures Limited, Hyderabad |
5 | KUMAR. M | Aadhini Elbit Advanced Systems India, Hyderabad |
6 | MAHESH. M | SD Pro Solutions Pvt Ltd, Bangalore |
7 | KARTHEEK. G | SD Pro Solutions Pvt Ltd, Bangalore |
8 | KALADHAR. V | SD Pro Solutions Pvt Ltd, Bangalore |
9 | MALLIKARJUNA. G | SD Pro Solutions Pvt Ltd, Bangalore |
10 | BHANUPRAKASH. K | Dharani CNC |
11 | ADIL HUSSAIN. R A | TEXEL Engineers Pvt Ltd |
12 | MOHAMMED ALI. S | TEXEL Engineers Pvt Ltd |
13 | ASHOK KUMAR. M | NRK Technologies, Hyderabad |
14 | REDDY SIVA REDDY. A | NDS Eco motors,Bangalore |
15 | VINAY KUMAR. K | NDS Eco motors,Bangalore |
16 | YASWANTH. M | NDS Eco motors,Bangalore |
17 | SIVABALI REDDY. Y | Bharathi Cements,Kadapa |
18 | SASIDHAR NAIDU. D | Bharathi Cements,Kadapa |
19 | ROHITH. B | Bharathi Cements,Kadapa |
20 | SAI CHARAN. R | Bharathi Cements,Kadapa |
21 | SAI JASWANTH KUMAR. D | Bharathi Cements,Kadapa |
22 | KIRAN BABU. M | Kaashiv Info Tech, Chennai |
23 | PRUDVI. G | Kaashiv Info Tech, Chennai |
24 | VASEEM KHAN. P | Kaashiv Info Tech, Chennai |
25 | SHAIK.SHAJAHAN | Kaashiv Info Tech, Chennai |
26 | PAVAN KUMAR. K | Kaashiv Info Tech, Chennai |
27 | MD. YOUSUFF MUSTHANEER AHMED KHAN. D | Kaashiv Info Tech, Chennai |
28 | PAVAN KUMAR. P | Supratheek Turbo Services, Hyderabad |
29 | NOORMOHAMMED. K | ISRO, Bangalore |
30 | RAMESH SHASHANK. P | ISRO, Bangalore |
31 | SAI KUMAR. J S | STULZ India,Bangalore |
32 | SELVA KUMAR. M | STULZ India,Bangalore |
33 | SRAVAN KUMAR. P | STULZ India,Bangalore |
34 | SHANMUKHA. P | PROSIM Solutions, Bangalore |
35 | VENKATA SAIPRAKASH. K | PROSIM Solutions, Bangalore |
36 | YUSUF. S | PROSIM Solutions, Bangalore |
37 | SATISH REDDY. S | PROSIM Solutions, Bangalore |
38 | JAYAKRISHNA. A | PROSIM Solutions, Bangalore |
39 | HARI BABU. G | Vizag Steel Plant,Vizag |
2018-19 | ||
S.No | Name of the Student | Company |
1 | L. Suresh Reddy, U. Maniratnam | Tirumala Automobiles |
2 | Y. Bhanu Prakash | L&T Construction |
3 | Vishnu Vardhan Reddy | In-finite Solutions |
4 | P. C. Sreenath Reddy, Y V Partha Saradhi, Vijaya Kumar Reddy | Bharathi Cement, Kadapa |
5 | Shaik Ayaj, Barakathulla Khan Mayana, P. Dilip Kumar, T. Harsha Vardhan, | SJP Industry, Bengaluru |
6 | S Praveen Kumar, A Chaitanya Reddy, P Syed Hussain, E Obulesu, M Vani Prasanna | TATA Advanced Materials, Bangalore |
7 | C Sreekar Reddy | BVL Power Systems Pvt. Ltd. |
8 | G Pavan Kumar | Crish Metal Works |
9 | Yogananda Reddy | TGV SRAAC Ltd. |
10 | Md. Harris, Md. Muzahid, R. Vishwanath | Lumens Aircon Pvt.Ltd. |
11 | S Veneeth Reddy | Aurobindo Pharma Ltd. |
12 | Sai Teja | Tube Products India |
13 | M Uday Kumar, M Harish | Jain farm fresh food Ltd. |
14 | Mohinth Royal | Army baseworkshop |
15 | K Fayaz, A K Guruswamy | DRDO |
16 | Sandhya M, Ramya Sree, Pallavi Y, G Reddy, V Manikanta | TIDC India Ltd |
17 | Shaik Rizauddin | ISRO |
2017-18 | ||
S.No | Name of the Student | Company |
1 | S Rupendra, K Sai Likith, M N Shasank, G Purushottam Reddy, M. Venkata Ramudu, S Venkatesh, D Subash Yadav, Santosh Kumar, Vamsi Krisna | Bhavani Industries, Bangalore |
2 | Sai Teru | Jay Ushin Limited |
3 | Jyothi Swaroop. B,Rajesh Gajula | KBD Sugars |
4 | Charan G, Harish Naidu Kancharla, Nageswar Reddy | Amara Raja Batteries |
5 | Manideep. P, Nishith. M, Prahallad. M. K, Prince. P, Srikanth. B, Prudvi. K, Raj Kumar. A. S, Prahallad. M. K, Praveen. E | Indo Mim Pvt.Ltd. |
6 | Ganeswar Reddy. R, Chennakrishna. M, Rammohan Reddy. B, Pavan Tendulkar Gundlapalli | Modine Thermal System |
7 | Gireesh. K, Ananda Vardhan. V, Sai Prathap. G, Sujendra Kumar. A | Tube Products India |
8 | E Sai Guru, B M Rohan, M Yeshwanth, S Babji, L Konda Reddy | Tube Investments of India |
9 | Mahesh. B, Mubarak Basha. S, Ranganath. V,Sanjay Hemanth Reddy. G, Sathish Kumar. S | Kun Aerospace Pvt. Ltd |
10 | Sateesh Kumar, Y Murali, T Md. Sahil, C Ramakrishna, T Fahad | Honda |
11 | Nanda Kiran. N, Prasanth Sankar. C, Pramod. K | Win Fiber Tech |
12 | Shaik Md. Khalid, C Sai Praneeth | Aliens Group |
13 | Rehana Thasleem | Media Mint |
14 | G Charan | Mechanical Engineering |
15 | B Balaji Naik | Maruti Suzuki |
16 | Chinna Obenna, S Manikanta, Vishnu Kumar, T S Gouse Basha | Farmator |
17 | Sai Prakash. S, Niharika. Gudhiti | Tata Technologies |
18 | G Purushotham, P Kishore Kumar Reddy, P. Jagadeesh, B Dinesh Naidu, A Sreekanth, B Praveen | Kun Aerospace Pvt. Ltd. |
19 | A Venu | Ekadhanta precision tech. |
20 | Harish Kumar Reddy | GGS Engineering services |
21 | P Manideep, M Nishith, E Praveen | Cummins Machine Line |
22 | M K Prahlad, P Prince, Raj Kumar | Indo Mim Pvt.Ltd. |
23 | Ranjith. C, Naresh. K, Sai Kumar,Suneel Kumar Reddy | Magcore Lamination India Pvt.Ltd |
24 | Rohith Reddy. M | Dassault Systems |
Higher Education
Inspired by the academic and research excellence in the Department an increasing number of the graduates have been choosing higher education both in India and abroad over the last few years.
S.No | R.No | Name of the Student | Higher Education college Name | Year of Graduation |
---|---|---|---|---|
1 | 15691A03D8 | Sai Charan. K | Guericke Universität Magdeburg | 2019 |
2 | 15691A03E1 | Sai Kumar. P | Nanyang technological university | 2019 |
3 | 15691A0374 | Madhavi Reddy. G.V | SVU | 2019 |
4 | 15691A03G4 | ShaikSamohani. K | JNTUA | 2019 |
5 | 15691A03C8 | Ranga Reddy. N | RVR & J C Engineering college | 2019 |
6 | 16695A0324 | Praveen Kumar. B | JNTUA | 2019 |
7 | 14691A03C6 | RanjithChakka | Sapienza University of Roma | 2018 |
8 | 15695A0324 | Vinod Kumar Kadavakuduru | Sapienza University of Roma | 2018 |
9 | 14691A03E2 | Sai RohithMummadi | Sapienza University of Roma | 2018 |
10 | 14691A03F9 | Sri Vishnu N | Sapienza University of Roma | 2018 |
11 | 14691A0385 | Mohammed Shareef. Shaik | Demontfort University Leicester | 2018 |
12 | 14691A0376 | Manoj. K | Sapienza University of Roma | 2018 |
13 | 15695A0323 | Vijaya Kanth Simham | JNTUA | 2018 |
14 | 14691A03G7 | Tharun Kumar. Balam | Osmania University | 2018 |
15 | 15691A03I1 | Vamsi Krishna. K | JNTUP | 2018 |
16 | 14695A0308 | Lokesh L | JNTUA | 2017 |
17 | 14695A0312 | Revantha Kumar M | MITS | 2017 |
18 | 14695A0309 | Mahesh Kumar Reddy A | JNTUA | 2017 |
19 | 12691A0343 | Mahendra Naik .B | MITS | 2016 |
20 | 12691A0306 | Arun kumar. A | JNTUA | 2016 |
21 | 12691A0313 | Bhavana. K | JNTUA | 2016 |
22 | 12691A0327 | Hanif. N | JNTUA | 2016 |
23 | 12691A0345 | Manjunath K | JNTUA | 2016 |
24 | 12695A0307 | Hareendranath.M | JNTUA | 2016 |
25 | 12691A0359 | Narendra. S | JNTUA | 2016 |
Alumni Meets
College Alumni Meets are conducted annually not only to provide a platform for the alumni to gather at their alma mater and rekindle their friendship but also to strengthen their bonding with the institution and enlist their participation in the pursuit of continuous improvement at the institution.
Alumni Interactions
Alumni interactions with students are conducted when Department alumni visit the campus either individually or in small groups. In these interactions alumni,drawing form their experiences, share with the students, their thoughts on topics likes:
- Employability skills
- Getting the first job
- What to expect at the place of employment
- Learning on job
- In-demand skills to get trained in
- Importance of attitude in getting and retaining a job
- Importance of communication skills
- Outlook of employment opportunities
- Outlook of higher education opportunities in India and abroad
- Benefits of higher education in India and abroad
- Getting admitted into good institutions for higher education
Click here for Event Details

Events and Activities at the Department
Department values the contribution of
co-curricular and extra-curricular activities to the
holistic development of the students and to their overall
employability. Faculty makes coordinated efforts to provide
the students with a wide choice of activities to engage in
for their all-round training, in-line with their
professional aspirations. Department also conducts
activities to bring in the participation of parents and
alumni in molding the students for success in their
professional pursuits.
In addition, the Department also believes in continuous
training and development of the faculty and accordingly
arranges activities for faculty development as well. The
major types of activities that are conducted/supported by
the department faculty are:
- Student Symposium with Project Expo.
- Faculty Development Program on emerging topics.
- Workshop on in-demand employability skills.
- Guest Lecture by Industry/Academic experts.
- Seminar on research topics.
- Alumni Meets
- Alumni Interactions
- Parents Meets
- Conference on Innovations in Mechanical Engineering.
- Technical Club activities like national and international design & development competitions.
Given below is a bird’s eye view of the professional development activities conducted in the Department in recent years.
S. No | Academic Year | No. of Programs | Guest Lectures | Workshops | Seminar | FDPs | Symposium |
---|---|---|---|---|---|---|---|
1 | 2019-2020 | 1 | 1 | 0 | 0 | 0 | 0 |
2 | 2018-2019 | 16 | 5 | 8 | 1 | 1 | 1 |
3 | 2017-2018 | 13 | 5 | 4 | 2 | 1 | 1 |
4 | 2016-2017 | 18 | 11 | 1 | 3 | 1 | 2 |
Parents Meeting
Parents meeting is conducted at the Department every semester. At these meetings parents are briefed, by the department faculty and the respective mentors of their wards, about:
- The policies and procedures in the institutions pertaining to the students and academics
- The facilities available in the institution for the benefit of the students
- Various activities and skills trainings conducted by the Department for overall development of the students
- Industry expectations from the graduates and requirements for smooth transition to a career or higher education
- The focus areas and plans of the Department to achieve placement of the students in good companies
- The academic progress of their ward and any possible issues or concerns
Mechonance
Mechonance is an annual national level student symposium for the mechanical engineering students that is being conducted by the Department since the year 2006. Students from several colleges as well as students from other Departments of MITS participate in this event along with the Department students and compete in various events including paper presentations, project expo, and quiz. A distinguished professional with mechanical engineering background is invited as chief guest at this event who delivers a keynote lecture to inspire and motivate the students towards higher achievement through hard-work and dedication. The event also offers workshops on latest buzz technologies like additive manufacturing, Computer Numerical Control (CNC) Machining, Non-conventional Machining, and MATLAB Programming.
National Conference on Innovations in Mechanical Engineering (NCIME)
NCIME is a annual national level conference conducted by the Department. The objective of the conference is to disseminate the emerging trends in the field of Mechanical Engineering by providing a common platform for academicians, industrialists, research scholars and students of the country to share and exchange their technical knowledge, expertise and experience by interacting with their peers and experts in the field. NCIME especially focuses on latest technical & societal challenges and emphasizes on addressing the same. Keynote lectures and invited talks by eminent experts and researchers are arranged in the conference to explore novel areas of research, introduce new avenues for participants to explicate research philosophy. This conference provides a supportive and encouraging platform for the delegates to exchange their research findings, to extend the future scopes and to establish collaborative relationships among research community across the nation
Faculty and Staff Development Programs
In order to produce industry ready engineering graduates, it is imperative that the teachers in the Department stay abreast with the latest tools and techniques employed by practicing engineers in the industry. The faculty and staff are thus provided with multiple opportunities to enhance and upgrade their skills in pace with the technological developments. In addition to sponsoring participation of faculty and staff in external training and development programs, Department also arranges Faculty Development Programs (FDPs) and Staff Development Programs (SDPs) on campus as well so that all members of faculty and staff can participate in such trainings. The topics for these programs include in-demand employability skills as well as pedagogical best practices.
Student Technical Clubs
Among the student clubs at MITS, the following are specifically suitable for the students, both from the Mechanical Engineering Department and from the other departments, interested in the craft of mechanical engineering, and accordingly mechanical engineering students and faculty play a major role in these clubs.
SAE India Collegiate Club of MITS
SAE Club at MITS was initiated in 2017 to provide a platform for the students interested in Automotive Technologies to team up and engage in practical learning through participation in motor sport events and competitions like SAE SUPRA, SAE BAJA, SAE E-Bike and ISIE HVC. Members of this club have won accolades at several major national and international events for their outstanding design, fabrication and operation of avant-grade automotives.
Aeromechatronics Collegiate Club of MITS
The vision of the Aero Mechatronics collegiate club is to unearth the hidden beyond-classroom talents of the technologically inclined students and channel their enthusiasm and efforts to create unique projects in the areas of aeronautics and mechatronics. The activities of the club include arranging workshops and trainings in aero-mechatronics, and bringing together student teams for participation in design competitions. The club has already made an good impact on campus and a team from the club has performed very well at a recent event - SAE Aero Design Challenge 2020.
Industrial visits
The students of the Departments are regularly taken to various industries with support from faculty. There are typically 5 or 6 visits every year to industries in different manufacturing fields. This co-curricular activity enables students to observe, firsthand, the practical applications of concepts learned in their coursework and helps them consolidate their classroom learning with a strong appreciation of real-world relevance. The specific outcomes that are addressed by the industry visits are that the students should be able to:
- Explain the functioning of the industry
- Describe the organizational structures of the industry
- Express insights on working culture in the industry
- Set career goals based on information gathered by visiting industries
- Enhance interpersonal skills, learning and communication skills
- List the do’s and don'ts in an Industry
- Discuss Safety, health and environment factors
Given below is a list of Industrial Visits arranged for the students during recent academic years
S. No | Date | Place of visit | Visited Students | Coordinators for the Visits |
---|---|---|---|---|
1 | 02.12.2022 | NARL, Gadanki | 50 students | Dr. K.V Nagesha & Mr. Rajesh pujari |
2 | 05.11.2022 | APSRTC, workshop | 30 students | Dr. Shanmukhasundaram V. R |
3 | 22.04.2022 | DIESEL LOCO SHED,South Central Railway Gooty | 30 students | Dr.S.Baskaran, Dr.R.Prithvirajan |
4 | 19.04.2022 | Sibar Auto Parts Private Limited, Tirupati | 51 students | Dr Ram Krishna, Mr.JagannathPattar, Mr.Raghavendra H |
5 | 20.03.2021 | Greentech Industries (India) Pvt. Ltd | 24 students | Dr. Pawan Kumar Chauhan, Dr. Ankit Saxena & Dr. Shanmukhasundaram |
6 | 2.03.2019 | Mangal Industries Ltd | 50 students | Dr. Aniket Dutt and Dr. Shankernath |
7 | 2.03.2019 | Amara Raja Batteries Limited, Tirupati | 50 students | Dr. Sampath Kumar and Dr. Srijan Sengupta |
8 | 03.01.2019 | Satish Dhawan Space Centre, Sriharikota | 94 – III B.Tech | Mr. Pawan Kumar |
9 | 03.11.2018 | Industrial Visit to Rayalaseema Thermal Power Project. | 45 - III B.Tech | Dr. Balaraju, Dr. Baskaran |
10 | 15.11.2018 | Central Manufacturing Technology Institute, Bangaluru | 50 students | Dr. Naresh, Dr. Prithvirajan |
11 | 15.11.2018 | Bangalore Integrated System Solutions Bangalore Integrated System Solutions | 50 students | Dr. Naresh, Dr. Prithvirajan |
12 | 16.03.2018 | CMTI, Bangalore | 11 M. Tech Students | Dr. K. V. Nagesha |
13 | 03.02.2018 | HMT Ltd., Bangalore | 110- III B.Tech students | Mr. Senthil Kumar J S, Dr. T. Vishnuvardhan, Dr. A. Balaraju, Mr. P. V. Ramana |
14 | 14.10.2017 | Rayalaseema Thermal Power Project, Muddanur, Kadapa | 50 - 3rd B.Tech students | Mr. Rayudu Peyyala, Mr. Venkata Ramana, Mr. Sreenivasulu Bejawada |
15 | 21.10.2017, | APSRTC DEPOT, MADANAPALLE | 50 - 3rd B.Tech students | Mr. Rayudu Peyyala |
16 | 16.09.2017 | COLD STORAGE, | 45 students- IV B.Tech | Mr. Rayudu Peyyala and Mr. P V Ramana |
17 | 7.10.2016 | Mangal Industries Ltd., Subsidiary of Amara Raja Batteries, Chittoor | II B. Tech ME –A & ME - B, 80 No’s | Mr. Rayudu Peyyala, Mr. V. Ajay, Mr. G. Guru Mahesh, P.V Ramana |
18 | 16.07.2016 | APSRTC Garage, Madanapalle | IV B. Tech A/s&B/s, 60 No’s | Mr.P. Rayudu, Mr.P. VenkataRamana |
19 | 29thMarch 2016 | Sharon Cold Storage, Chittoor Dist. | III B. Tech, ME- A, B, C, 190 No’s | Mr. Rayudu. P, Dr. P.S.N. Raju, Mr.CH. S. Rao, Mr. P. VenkataRamana |
20 | 28th March 2016 | Atmika Paper Mills, Molakalacheruvu, Chittoor Dist. | II B. Tech, ME- A, B, C, D, 120 No’s | Mr.P. Rayudu, Mr.P. VenkataRamana, Mr.V. Ajay |
21 | 28thMarch 2016 | KNM Cold Storage, Angallu, Chittoor Dist. | II B. Tech, ME- A, B, C, D, 120 No’s | Mr.P. Rayudu, Mr.P. VenkataRamana, Mr.V. Ajay |
22 | 19th Sept 2015 | Atmika Paper Mills, Molakalacheruvu, Chittoor Dist. | III B.Tech, ME –A & ME - B, 120 No’s | Mr. P. Rayudu, Mr. G. Sadasiva Prasad, Mr. Ch. Sreenivasa Rao, |
23 | 1st May 2015 | Mangal Industries Ltd. , Subsidiary of Amara Raja Batteries, Chittoor | II B. Tech ME –A & ME - B, 110No’s | Rayudu Peyyala, V. Ajay, Guru Mahesh, P.V Ramana |
24 | 4th April 2015 | APSRTC Garage, Madanapalle | 60 II B. Tech, ME - C, No’s | Rayudu Peyyala, V. Ajay |
25 | 19th March 2015 | APSRTC Garage, , Madanapalle | IV B. Tech ME-A & B, 60 No’s | Rayudu Peyyala, V. Ajay, |
26 | 5th March 2015 | Mangal Industries Ltd. , Subsidiary of Amara Raja Batteries, Chittoor | III B. Tech ME –A & ME - B, 120 No’s | Rayudu Peyyala, V. Ajay, Guru Mahesh, P.VenkataRamana |
27 | 4-Apr-15 | APSRTC Garage, Madanapalle | II B.Tech ME-C, 60 No’s | Rayudu Peyyala |
28 | 7th Feb 2015 | APSRTC Garage, Madanapalle | III B. Tech ME –A & ME - B, 120 No’s | Mr.P. Rayudu , Mr. P. Venkata Ramana Mr.V. Ajay |
29 | 21st Feb 2015 | APSRTC Garage, Madanapalle | IV B.Tech, ME-A, 60 No’s | Rayudu Peyyala, V. Ajay |
Faculty industrial visits
Faculty of the department regular visits the industries to maintain close contacts with the companies. The objectives of this industry interaction by the faculty are to arrange internship for students, explore scope providing consultancy and identify avenues for collaborative research. Table below gives the details of recent industry visits by the faculty.
S.No. | Date | Names of the Faculty | Name of the Industry |
---|---|---|---|
01 | 23-24th Nov 2017 | Dr. Senthil Kumaar J S | CII - Sohrabji Godrej Green Business Centre Bangalore |
02 | 23- 24th Aug 2017 | Dr. Senthil Kumaar J S | CII Southern Region at Jeppiaar Engineering College, Chennai |
03 | 15th Dec 2017 | Dr. S. Thamizhmanii | M/s Murugappa Group and M/s Rane (Madras) Chennai |
04 | 16th Dec 2017 | Dr. S. Thamizhmanii | TI Metal Forming Ltd, Tirunindravur, Chennai TIDC India Ltd, Ambattur, Chennai-53 |
05 | 3rd Nov 2018 | Dr. A. Balaraju | Rayalaseema Thermal Power Project |
06 | 3rd Feb 2018 | Dr. A. Balaraju | HMT Limited Bangalore |
07 | 15th Nov 2018 | Dr. R. Prithivi Rajan | Bangalore Integrated System Solutions (BISS) & Central Manufacturing Technology Institute (CMTI), Bangalore |
08 | 3rd Nov 2018 | Dr. K. V. Nagesha | Rayalaseema Thermal Power Project |
09 | 15th Nov 2018 | Dr. P. Naresh | Bangalore Integrated System Solutions (BISS) & Central Manufacturing Technology Institute (CMTI), Bangalore |
10 | 2nd Mar 2019 | Dr. Aniket Kumar Dutt | Mangalam Industries |
11 | 2nd Mar 2019 | Dr. Shanker Nath | Mangalam Industries |
12 | 6th Dec 2018 | Dr. Srijan Sengupta | KIADB Hoskote Industrial Area, Bangalore |
Intellectual Meet
The Department of Mechanical Engineering has initiated a new periodic event to facilitate constructive dialog between the Department faculty on their research activities. This series of seminars, dubbed “Intellectual Meet,” takes place on alternate Saturdays wherein each time one faculty presents his recent research findings to the faculty and interested students. These gatherings have raised the awareness among the faculty and the students about the current research endeavors being undertaken in the Department and exchange of ideas and insights between the faculty. The heightened level of technical interactions among the faculty, achieved through the “Intellectual Meet,” are expected to sprout new collaborations within the Department and thus have a positive impact on the research output of the Department in terms of peer reviewed publications, external project grants, and consultancy assignments.
Seminars
Eminent scholars from Industry and Academia are regularly invited to the Department to deliver a seminar on an advanced technological developments or to motivate students by explicating the current trends and expectations of the industry.
Guest Lectures
Some of the topics with fall within the curriculum are covered by practicing engineers from Industry or academicians with strong research credentials in these events titled 'Guest Lectures' which provide students with deep insights about the concepts and their applications in real life.
Workshops
Workshops are conducted to train students in specific skills that are relevant to Mechanical Engineering and are in-demand in the Industry. The resource persons for the workshops are usually professional skills trainers or experts from industry with demonstrated experience in the skill.
Click here for Event Details
Click here for Event Details
Click here for Event Details
Click here for Event Details
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Events
Organized Events :
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Event Details
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Details on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click here for Report on Event
Click Here For Details on Event
Click Here For Details on Event
Click Here For Report on Event
Click Here For Report on Event
Click Here For Report on Event
Click Here For Report on Event
Click Here For Report on Event
For Report On Event Click Here
For Report On Event Click Here
For Report On Event Click Here
Contact Us
Dr. M. Lakshmana Rao
Head of the Department-MECH
Madanapalle Institute of Technology & Science
Post Box No: 14, Kadiri Road, Angallu
Madanapalle-517325, Andhra Pradesh
Phone: +91-8571-280255; 280706 (Extn: 126)
Mobile: +91 9160020782
Email: [email protected]